Table of Contents
Advertisement
Chapter 2: Taking a Color Measurement
6
The Measure Indicator above the "Measure Color" button will begin to flash, and u'v'Y values will begin
to show in the measurement windows, and also the graph area.
You may switch color measurement from xyY ot u'v'Y by pressing the Display Units buttons.
This will also change the graphic units.
You may view the graphic of the color data by choosing the Graph to be CIE (shown above), Maginfied
(for a closer look at the center of the CIE graph), or Bar (startup default. Sliders, for making adjustments.
There will also be an "OK/NoPass" shown below the Y slider. This can be turned on or off from the menu
item "Setup".
4
Chapter 3: Gamma Measurements
4.1
Gamma Measurement
The Gamma Measurement function is accessed from the "Gamma" button on the main window.
By aiming the colorimeter at a display which is running the Klein K Colorimeter PC program, the user
can run a test which will calculate the gamma of the display and display driver.
The number of video intensity steps is programmable in the menu item"Gamma Test Setup".
When the colorimeter has taken the number of readings required by the Gamma Test Setup, a graph is
© 2003 Klein Instruments Corporation
Advertisement
Table of Contents
