Ohana Kahuna Manual page 9

3. When your smartphone/device finishes searching, select " KAHUNA" from the
device list. When connected, the LED indicator light with flash slowly and a
voice alert ("Pairing completed") will sound to confirm a successful connection.
After initial pairing, "KAHUNA" will appear in your device list and a connection will
automatically be established if the speaker is powered on and Bluetooth is already
activated on your device. A voice alert ("Pairing completed") will sound to confirm
a successful connection
NOTE: When you end the Bluetooth connection from your device, a voice alert
("Disconnected") will sound and the blue Bluetooth Indicator LED will flash rapidly
to indicate that the connection has been lost.
Auxiliary
Your Kahuna can also connect to audio devices that are not Bluetooth enabled.
Connect your device to your Kahuna using an auxiliary (AUX) cable (included) by
inserting one end of the plug into the AUX IN port on the base of the Kahuna and
the other end into your device as specified.
9