StarTech.com PRIVSCNMON Series Quick Start Manual

Universal Privacy Filter
Product Diagram (PRIVSCNMONxx)
1
2/3
Component
• Privacy comes into effect when viewing
1 Privacy Filter
• Total field of view of 60 degrees
• Secure the Privacy Filter to the Monitor's
2 Mounting Tabs (x 5)
• The adhesive on the Mounting Tabs
• Secure the Privacy Filter to the Monitor's
Adhesive Strips (not
3
displayed)
• The Adhesive Strips become less effective
Package Contents
• Privacy Screen x 1
• Set of Adhesive Strips x 1 (screens up to 27") or 2 (screens larger than 27")
• Set of Mounting Tabs x 1
• Wiping Cloth x 1
• Quick Start Guide x 1
Requirements
For the latest requirements, please visit the following link and replace "xx" with the desired
privacy filter size:
www.startech.com/PRIVSCNMONxx
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Function
anywhere past 30 degrees from the left and
right of center
surface
becomes less effective with frequent removal/
reapplication
surface
with frequent removal/reapplication
Install the Privacy Filter -- Adhesive Strips
For installations that are intended to be permanent, or if the Monitor does not feature
large Bezels, please use the Adhesive Strips.
1. Clean the Laptop Display and Bezels, using the Wiping Cloth.
2. Select the side of the Privacy Filter that is intended to face outward (i.e. matte or
glossy side) and place the Privacy Filter on a clean and flat surface with the selected
side facing down.
3. Remove all the Adhesive Strips from the Transparent Lining.
Removing the Adhesive Strips
4. Carefully align the Adhesive Strips along the edges (top, bottom, left, and right) of
the Privacy Filter and affix to the Privacy Filter by applying firm pressure to all the
Adhesive Strips.
Applying the Adhesive Strips
5. Carefully remove the Protective Backing from the Adhesive Strips, exposing the
screen side adhesive.
Remove the Protective Backing from the Adhesive Strips
Quick-Start Guide
Manual Revision: February 4, 2021 5:57 PM