TransLite Veinlite LED Quick Start Manual

Hide thumbs Also See for Veinlite LED:

Table of Contents

Download this manual

Veinlite LED Light Shield

READ INSTRUCTIONS BEFORE USE

CAUTION:



United States Federal Law restricts this device for sale by or on the order of a

qualified health care professional.



Veinlite LED is designed for external examination only.



To avoid contamination of the device, do not use Veinlite LED without the



To avoid spread of infection, always change the disposable plastic cover between

patients.

TransLite, LLC

345 Commerce Green Blvd

Sugar Land, TX 77478, U.S.A.

Veinlite

LED

Veinlite LED Pediatric Adapter

Tel: (281) 240 3111

www.veinlite.com

info@veinlite.com

Fax: (281) 240 3122

Table of Contents

Need help?

Do you have a question about the Veinlite LED and is the answer not in the manual?

Page 1  Veinlite LED is designed for external examination only.  To avoid contamination of the device, do not use Veinlite LED without the disposable plastic cover.  To avoid spread of infection, always change the disposable plastic cover between patients.
Page 2 Each set of LEDs can be independently selected by pressing one of two separate buttons [2] located one on each side of the Veinlite LED. The orange LEDs are controlled by the orange button and the red LEDs by the red button. Both sets of LEDs can be switched on at once by pressing both buttons at the same time.
Page 3 Before using Veinlite LED, place it inside the cover with the flap on the same side of the the LEDs. When it is inside the cover, wipe the LED side of the Veinlite LED, and any part of it coming in contact with the patient, with a medically approved germicidal wipe.
Page 4 TransLite for assistance. - Battery Fails to Charge If the battery fails to charge and the Veinlite LED is over two years old, please replace the battery with a new one. You can order a replacement battery from TransLite via our web site, www.veinlite.com, or by calling TransLite or its authorized dealer.