Download Print this page

Pertronic A2096 Quick Start Manual

Fire phone intercom

Product Overview:

The Fire Phone Intercom is designed specifically for use as a warden intercom point (WIP) in emergency warning

systems (EWS).

The intercom is used for communication between floor wardens and the main emergency evacuation control panels.

When the handset is lifted, the Fire Phone Intercom automatically calls the emergency evacuation control panel. When

the emergency evacuation control panel calls the WIP the call tone sounds through the speaker in the body of the phone.

Lifting the handset automatically transfers sound from the phone body speaker to the handset speaker.

Selectable line impedance 600 Ω or 4.7 kΩ

Separate speaker for call tone

Simple two wire connection

SSL approved, complies with AS2220

Includes wall mounting bracket

Call tone 80 dB 1 W / 1 m

Frequency response 300 Hz – 3 kHz

Fire Phone Intercom

Table of Contents

Do you have a question about the A2096 and is the answer not in the manual?

Page 1 Fire Phone Intercom Product Overview: The Fire Phone Intercom is designed specifically for use as a warden intercom point (WIP) in emergency warning systems (EWS). The intercom is used for communication between floor wardens and the main emergency evacuation control panels. When the handset is lifted, the Fire Phone Intercom automatically calls the emergency evacuation control panel.
Page 2 Pin 2 and 3. We recommend that the handset is always returned to the cradle when waiting for a call. Ordering Information: Product Code Description A2096 Fire Phone Intercom Red - WIP Pertronic Industries Pty Ltd www.pertronic.com.au Fire phone Iss 1.1 July 2015...