Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Precision Pro NX9
Summary of Contents for Precision Pro NX9
- Page 1 PRODUCT MANUAL NX9 SLOPE GOLF RANGEFINDER...
-
Page 2: Product Overview
PRODUCT OVERVIEW 1 - Laser Lens 2 - Optical Lens 3 - Mode Button (Slope + Yards/Meters) 4 - Power & Activate Laser Button 5 - Adjustable Eyepiece 6 - Battery Door... - Page 3 1 - Target Acquisition Indicator 2 - Mode Indicator (M1 - Slope O M2 - Slope On) 3 - Battery Indicator 4 - Slope-Adjusted Distance 5 - Yards/Meters Indicator (Yd - Yards M - Meters) 6 - Non-Slope Distance...
- Page 4 HOW TO USE 3. Point the crosshair at the target -- flag, tree, 1. Look through the eyepiece and press the green 5. The rangefinder will automatically turn o after 10 bunker, etc. Then press and release the green power button to turn on the rangefinder. The seconds.
- Page 5 YARDS/METERS 1. Press and hold the black MODE button for three seconds to change between yards and meters. You will see a Yd in the bottom right-hand corner for Yards and a M for Meters. Yd - Yards M - Meters...
- Page 6 SLOPE/NON-SLOPE 1. Press and release the black MODE button to toggle between Slope and Non-Slope. 2. When slope is o , you will see an M1 on the left side of the display. When Slope is turned on, you will see an M2 on the left side of the display.
-
Page 7: Changing The Battery
CHANGING THE BATTERY 1. Open the battery door by sliding the panel away 3. Check the viewfinder to make sure the battery is from the eye piece. fully charged and operating correctly. 2. Remove the old battery and insert the new battery 4. -
Page 8: Best Practices
BEST PRACTICES PAN OVER TARGET: For the best results, pan the DON’T COVER THE LENS: Make sure the front of crosshair over the target slowly as you measure the the rangefinder is unobstructed. A finger or side of distance. the palm will interfere with the laser and result in inaccurate measurements. - Page 9 1. The built-in magnetic cart mount will adhere to any flat metal surface. Attach the rangefinder so that the Precision Pro logo is facing out. 2. When attaching to a frame of a golf cart, make sure that the rangefinder is parallel with the bar. Not...
- Page 10 CONTACT US (888) 568-6770 help@precisionprogolf.com precisionprogolf.com...
Need help?
Do you have a question about the NX9 and is the answer not in the manual?
Questions and answers
How do I change from meters to yards
To change the Precision Pro NX9 from meters to yards, press and hold the power button for 5 seconds while the LCD is off. Alternatively, you can press and hold the black MODE button for three seconds until you see "Yd" for yards or "M" for meters in the bottom right-hand corner of the display.
This answer is automatically generated
my range finder has started showing 10 yards short on everything