Qwest CHOICE HOME Instruction Manual page 9

HELPFUL
HINTS
Any questions?
1 800-244-1111
qwest.com
CALLING THE UPDATE CENTER
Some features need to be activated through the Update
Center before you can use them. The first time you call
the Update Center to set up your security code, you
must place the call from your home phone.
*78
• Call from your home phone.
• You'll be asked for a four-digit security code. The
1234
first time you call, enter
prompts to set up your own security code.
For your protection, the temporary code expires
in 30 days. If you do not set up your permanent code
within that time, call us to have the temporary
security code reset.
• Once you set up a code in the Update Center, you
can use the same security code for all your features.
• After your security code is set, reach the Update
*78
Center either by calling
phone or 1 888-(Your Area Code)-8052* from any
other phone.
* In Minnesota area codes 763 and 952,
call 1 888-612-8052 to reach the Update Center.
In Iowa area code 641, call 1 888-515-8052.
In Arizona area code 928, call 1 888-520-8052.
In Oregon area code 971, call 1 888-503-8052.
USING THE FLASH COMMAND
When the instructions say FLASH, you can use
either the Flash key on your phone, or you can
quickly press and release the switchhook instead –
that's the receiver or "hang up" button. Make
sure you hear three short tones, followed by a
continuous dial tone before proceeding to the
next step.
, then follow the
from your home
FLASH key =
Switchhook Button