Mi POE 4+4 GM Manual

4+4 CHANNEL GB PASSIVE DC POE STRIP WITH MANAGEMENT –POE 4+4GM Mi
Innovative Electronics for a changing world
MANUAL
POE 4+4 GM
Index:
Description
Technical and connections
Screen shots
Physical
Description:
The POE 4 +4 GM is an 4+4 = 8 Channel Gigabit DC passive power over Ethernet injector unit with a 10Mbs
management Ethernet interface to allow the user to toggle the power output of each one of the 8 POE power
outputs via a web-browser interface.
POE output ports is Grouped into Group A (4 POE channels) and Group B (4 POE channels) –The user can select the
MODE (MODE B-2 pair power or PHANTOM POWER-4 pair power) and voltage (24VDC or 48VDC- input dependant)
for each group of 4 POE outputs individually via changing power connections at the rear of the unit.
The unit operates from 18Vdc to 60Vdc supply voltage for Group A and B .
Technical & Connections:
The unit have 8 LAN input Ports and 8 LAN + POE output ports via 70W POE+ Gigabit Ethernet transformers.
All Power output Ports on the device is protected via 1Amp PTC thermal self recoverable fuses against short circuits
and faulty equipment that might be connected to the port.
The unit controls power to each POE output port via mechanical relays for robustness on the power line from
incoming spikes on the power line caused by ESD discharges etc.
POE Port 1 to 8 can only be toggled to break power to the POE outputs 1 to 8 to reset connected devices.
The POE port will after being toggled – automatically re-connect power to the connected device after 15 seconds so
the user can not log himself out permanently of a connection to the remote tower.