Summary of Contents for UBTECH RAD001
- Page 1 UBTECH Sensor-controlled safety sign USER MANUAL Sensor-controlled safety sign USER MANUAL UBTECH ROBOTICS CORP LTD...
-
Page 2: Table Of Contents
UBTECH Sensor-controlled safety sign USER MANUAL CONTENT CONTENT............................2 Introduction............................3 Part 1 Product Overview......................... 4 1.1 Package List........................4 1.2 Product View........................4 1.3 System Framework......................5 Part 2 Safety Information........................ 5 2.1 Device Security........................6 2.1.1 General........................6 2.1.2 Operation Instruction..................... 6 Part 3 Device System Operation.................... -
Page 3: Introduction
The nameplate label is affixed to the lower part of the back of the robot. ◆ This product contains a wireless Bluetooth module. This module is an integrity module and has FCC certification. The model approval code is FCC ID: *****-RAD001. UBTECH ROBOTICS CORP LTD... -
Page 4: Part 1 Product Overview
UBTECH Sensor-controlled safety sign USER MANUAL Part 1 Product Overview 1.1 Package List • UVC Sensor-controlled safety sign (Door Sensor) *1 • User manual *1 NOTE: • Sensor-controlled safety sign use AA battery *8 1.2 Product View • Front ： LED *2 、 Caution Slogan... -
Page 5: System Framework
UBTECH Sensor-controlled safety sign USER MANUAL • Back ： Power On button 、 Mode button • Side ： Battery cover 1.3 System Framework Part 2 Safety Information Please read the following information carefully, the company will not be responsible for direct or indirect losses caused by improper use of the product. -
Page 6: Device Security
UBTECH Sensor-controlled safety sign USER MANUAL 2.1 Device Security 2.1.1 General If you have no experience in operating Sensor-controlled safety sign, you need to be especially careful. Because you may not be familiar with Sensor-controlled safety sign operation at first. -
Page 7: Part 3 Device System Operation
UBTECH Sensor-controlled safety sign USER MANUAL If Sensor-controlled safety sign works abnormally, especially when you detect unusual sounds, smells or smoke, please take precautions and immediately turn off the power, remove the battery, and contact the technical support center. Part 3 Device System Operation... -
Page 8: Caution
UBTECH Sensor-controlled safety sign USER MANUAL for example safety, fault and son on If any intrusion is detected through the Intrusion movement and dumping of Sensor-controlled detection safety signs, the equipment shall be informed to stop disinfect in time Sensor-... -
Page 9: Sensor-Controlled Safety Sign State Indicator
UBTECH Sensor-controlled safety sign USER MANUAL the disinfection equipment will be informed in time to stop disinfect. After the disinfection equipment stops disinfect, the status of the equipment will be fed back to the Sensor-controlled safety sign • The disinfection equipment status includes the non safety state of normal operation... -
Page 10: Part 5 Transporting, Clean And Storage
UBTECH Sensor-controlled safety sign USER MANUAL meters, which can block a conventional room door (such as hotel or hospital room door) • Users can upgrade firmware via Bluetooth OTA • Pairing steps of Sensor-controlled safety sign: When it is not paired, it will prompt "there is no pairing Sensor-controlled safety sign"... -
Page 11: Part 6 Reference
UBTECH Sensor-controlled safety sign USER MANUAL long time. It is found that there is no indication after the Sensor-controlled safety sign is opened. Please make sure that the battery has power. Part 6 Reference 6.1 Device Specification Dimensions Size 524(L) * 322(W) * 752(H) mm Weight 2.2kg... -
Page 12: Part 7 Declaration Of Conformity
UBTECH Sensor-controlled safety sign USER MANUAL activated -Check whether the battery socket in the control box is loose, abnormal or insufficient; -If the problem persists, please contact product technical support center. -The distance between entrance guard and disinfection equipment is too far. You can try to shorten...
Need help?
Do you have a question about the RAD001 and is the answer not in the manual?
Questions and answers