Inmes IF-8500 Manual
  1. Manuals
  2. Brands
  3. Inmes Manuals
  4. Drill
  5. IF-8500
  6. Manual

Inmes IF-8500 Manual

Cnc drilling machine
Hide thumbs
Table of Contents

Advertisement

Quick Links

Dear Customer,
Thanks for allowing us to share the experience of using an Inmes product.
This manual has been formulated by our technical team specially for you, with the objective of instructing
you on how to use this equipment with safety and productivity.
The IF-8500 CNC Drilling Machine has been developed within the highest technology, to solve your
drilling problems in wood boards, allowing you to get the best value for money additionally to a great finishing
adding more value to the furniture.
Visit our brand website to learn about our new releases and our full product line.
Note: INMES Industrial LTDA. Reserves the right to change this manual without previous notice.
http://www.inmes.com.br
If necessary, contact your distributor to get technical assistance.
Write down the serial number of your equipment below.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IF-8500 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Inmes IF-8500

  • Page 1 The IF-8500 CNC Drilling Machine has been developed within the highest technology, to solve your drilling problems in wood boards, allowing you to get the best value for money additionally to a great finishing adding more value to the furniture.

  • Page 2: Table Of Contents

    1.6.1 – Safety Labels ..........................6 1.7 – When finished operating the machine .................... 9 2 – RECEIVING AND GETTING ACQUAINTED WITH THE IF-8500 CNC DRILLING MACHINE9 2.1 – Receiving the IF-8500 Drilling Machine ..................9 2.2 – Working Area ..........................13 2.3 –...

  • Page 3: Safety Instructions

    ✓ Leave enough space around the machine and a good lighting in the workshop. ✓ When changing the tools or when performing a maintenance job, the machine must always be disconnected INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 4: Tools Specifications

    10mm – 3/8” 15mm – 9/16” 58mm – 2 ¼” 4mm – 3/16” Rotation limit equal or superior to 5500rpm; To be adequate to the type of material to be cut (wood boards and similar). INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 5: Before Every Use

    ✓ Only use sharpened drills, cutters and blades and in perfect working conditions; ✓ Keep the cutting tools clean; ✓ Always keep the working area clean, the dust resulting from work can make the floor slippery; INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 6: Protection

    ✓ Keep your hair away, wear a protection cap if necessary; ✓ Always wear hearing protection; ✓ Always wear protection glasses; Always remember: A minor distraction is enough to cause serious accidents; 1.6.1 – Safety Labels INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 7 Label Indication Indicates the safety rules that must be followed when operating the machine. Risk of crushing, keep hands away. Indicates the use of appropriate clothes. Indicates the use of hearing protection. INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 8 Indicates the use of eye protection. Indicates the use of protection shoes. Indicates the use of gloves. Risk of electric shock INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 9: When Finished Operating The Machine

    In case you own more than one equipment of the same model, identify it writing the serial number down on its respective manual on page 2 2. 2 – RECEIVING AND GETTING ACQUAINTED WITH THE IF-8500 CNC DRILLING MACHINE 2.1 –...
  • Page 10 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 11 ❖ Items in the assembling kit IF-8500 Item Description Quantity Barcode Reader Spiral Tube Air Outlet for Cleaning Articulated Leveler Washer 6.35x17.46x1.58mm Domed Head Screw Hex. Int. M6x10mm Hex. Head Screw Int. M6x30mm Tilt Stand Wedge Hex. Head Screw Int. M10x40mm Hex.
  • Page 12 Extension Table Eccentric Shaft Bearing Support Bushing Extension Table Output Support Articulated Leveler Hex. Self-Locking Nut M10 Hex. Nut M12 zinc. DIN 934 Domed Head Hex. Screw Int. M6x16mm Bearing 6300 DDU Retractable Shaft Roller INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 13: Working Area

    2.2 – Working Area It is recommended that the working area have at least the dimensions indicated in the image below. INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 14: Getting Acquainted With The If-8500 Drilling Machine

    2.3 – Getting Acquainted with the IF-8500 Drilling Machine 01 – Outfeed Table; 07 – Air Filter; 02 – Oil Container; 08 – Control Panel; 03 – Air Output for cleaning; 09 – Barcode Reader; 04 – Air Pressure Regulator;...

  • Page 15: Learning About The Control Panel

    15 – Ø4” Dust Collection; 2.4 – Learning about the Control Panel 01 – Touch Screen; 04 – Reset Button; 02 – Start Button; 05 – On/Off Button; 03 – Emergency Button; 06 – USB Port; INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 16: Learning About The Touch Screen Interface

    2.5 – Learning about the Touch Screen Interface Item Icon Meaning Page Machine Limits Sistaxis Error Execution Error Head Lock Encoder Air Pressure Emergency INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 17 Shows that the clamp is activated. Shows that the tool is activated. Shows that the head lock is activated. Shows that the door is open. Work Plan Name. Exit Help Maintenance Work Cycles Alarms Stop Working INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 18 Jog – Movement of the machine shafts. Search for programs (through the network or USB) Shows the position of axis A Shows the position of axis Z Shows the position of axis Y Shows the position of axis X INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 19: Technical Specifications

    3 – TECHNICAL SPECIFICATIONS INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 20: Installation

    Carefully lift the crane without swinging the equipment, then move the machine to its proper place. Fig.06 Fig.07 4.2 - Characteristics of the Installation Area The machine should be positioned where it will be installed. The floor where the machine will be installed should be flat and solid. INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 21: Electrical Installation

    4.3 – Electrical installation Check with your local electric company about the rules for installing this type of equipment. INMES is not responsible for any adjustments the customer has to make to meet the standards required by the local electric company.

  • Page 22: Installation Of The Compressed Air System

    Fig. 07. You must install a hose for connection to the 5/16” bore air duct. Fig. 4.4 Attention: The minimum working pressure of the machine must not be less than 6 BAR. INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 23: Installation Of The Exhaust System

    4.5 – Installation of the Exhaust System The IF-8500 Drilling Machine has two dust extraction outlets, one at the top rear (01) and one at the bottom rear (02) according to Fig.4.5.1, both 4 inches in diameter. Fig.4.5.1 It is mandatory to connect the machine to an efficient exhaust system. The speed at each exit must be 25 m/s.
  • Page 24 220 v 380 v 6.3-10 7-10 EM – 300 3-Phase 4-6.3 4-6.3 If the exhaust has greater power, refer to the manufacturer's manual. For best efficiency we recommend that the piping be as follows: INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 25: Software Installation

    4.6 – Software Installation The IF-8500 Drilling Machine requires a computer with the following requirements for installing the GCad Software that will be used to run the machine programs.

  • Page 26: Security System

    5.1 – Movable Protection of the Drilling Set Access For your safety, the IF-8500 Drilling Machine has a movable protection (01) Fig.5.1.1 which prevents access to the drills, cutters and blade when in operation. To access these tools, see Item 7.4 – Tool Replacement.
  • Page 27 Each time the Emergency Button is pressed, the Emergency Alarm will appear on the Control Panel as shown in Fig.5.2.5. Fig.5.2.5 In the main screen click on the “Alarms” icon as shown in Fig.5.2.6. Fig.5.2.6 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 28 In the next screen, click on the “Emergency” icon as shown in Fig.5.2.7. Fig.5.2.7 Then click on “Confirm” as shown in Fig.5.2.7. Fig.5.2.7 The next step is to click “Close” as shown in Fig.5.2.8. Fig.5.2.8 INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 29: Reset Button

    Press the Reset Button to restart the system. Fig.5.3.2. If the safety devices are working properly, the alarm icon will not appear on the display and you can operate the equipment normally. Fig.5.3.2 INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 30: Operation

    1 - Make sure that the two Emergency Buttons, items 02 and 06, are not activated; 2 - Turn the Main Switch 05; 3 - Turn Knob 04 clockwise to the On position; 4 - After the display turns on, press the Reset Button 03; INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 31 2 - Click on “Shut Down”; 2 - Wait for the display to turn off and then turn button 01 off on the Control Panel Fig.6.1.4; 3 – Turn off the Main Switch, Fig.6.1.5; Fig.6.1.3 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 32 Fig.6.1.4 Fig.6.1.5 INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 33: Entering The Work Schedule In The Drilling Machine

    To start a drill job, you must have the Work Schedule. The Work Schedule is created on GCad in your office and can be sent to the machine. The IF-8500 Drilling Machine has four options for inserting programs into the machine: USB Flash Drive, Ethernet cable, Wi-Fi and Barcode Reader.
  • Page 34 Fig.6.2.3. Fig.6.2.3 After connecting the Ethernet cable, on the display, click on the icon shown in Fig.6.2.4, until “File net- work” appears on the display. Fig.6.2.4 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 35 The machine has an internal antenna for Wi-Fi signal. Fig.6.2.5 ❖ Via Barcode Reader: To use The Barcode Reader to insert drilling programs, use the USB 01 input which is located on the back of the machine as shown in Fig.6.2.6. INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 36 Fig.6.3.4. Just click on the name of the program to select it. Fig.6.3.4 When you select the Work Program on the display, you must enter the number of parts that will be drilled as shown in Fig.6.3.5. Fig.6.3.5 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 37 The operator must check the dimensions of the part to be inserted in the Drilling Machine so that it is as shown by the program on the display. Always check length, height and thickness before starting work. Measuring the piece length Fig.6.3.7 Measuring the piece height Fig.6.3.8 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 38 Measuring the piece thickness Fig.6.3.9 After checking the dimensions of the piece, insert it through the door opening until it touches the stop 01, as shown below: INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 39 If a piece has holes on both sides, the Drilling Machine will display a warning on the screen for the operator to rotate it. It is important to rotate the piece properly so that the drilling is done correctly. The correct way to rotate the piece is shown in the figure below: INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 40 When the drilling is done, the piece will be in position to be removed. The exit position of the piece depends on the settings made in the drilling program on the GCad software. The piece can come out on both sides of the machine as shown below: INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 41 To use the scanner, push the trigger and point the laser at the barcode on the label that is attached to the piece. By doing so, the reader will transfer the drilling program of the piece into the Drilling Machine. Fig.6.3.14 INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 42: Jog Function

    WARNING: If a measurement larger than the machine limit is specified, it may damage the equipment Use this button to reference the desired axis. This button triggers the tools. This button activates the clamps. Access to machine settings (Technical Access, not available to the customer). INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 43 Moving the Y axis When moving the “Y” axis, the Drilling Machine will move the drill set up and down as shown in the image below: Use the buttons below to move the “Y” axis INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 44 Moving the A axis When moving the “A” axis, the Drilling Machine will rotate the tool head clockwise and counterclock- wise as shown in the image below: Use the buttons below to move the “A” axis INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 45: Cycles Function

    Fig.6.5.4. Fig.6.5.3 Fig.6.5.4 If you no longer want to use the Cycle function, just click on the icon to turn it off. This way it will be disabled. INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 46: Maintenance

    Unclip the plastic shield from the filter by pulling at the top as shown in Fig.7.1. Fig.7.1 Then remove the filter as shown in Fig.7.2. Fig.7.2 To clean the filter, use compressed air as shown in Fig.7.3. Fig.7.3 INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 47: Axis Y Link Chain Cleaning

    It is recommended to periodically clean the Axis Y Link Chain. Do this along the entire length of the chain. To clean the chain links, use compressed air as shown in Fig 7.6. Fig.7.6 INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 48: Axis Z Sensor Cleaning

    Try to keep both the top and bottom of the head cylinder and head lock plate clean. To clean the cylinder head cylinder and lock plate use compressed air in the areas shown in Fig 7.8 and Fig 7.9. Fig.7.8 Fig.7.9 INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 49: Cleaning The Axis X Linear Guide And Gear Rack

    After loosening the screws, remove the guard plate and identify the Axis X Linear Guide and Gear Rack shown in Fig 7.11 Fig.7.11 To clean the Linear Guide and the Gear Rack, use compressed air as shown in Fig. 7.12 and 7.13. Fig.7.12 Fig.7.13 INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 50: Lubrication

    Grease and Lubricant Chart Where Machine Grease/Oil Suggested apply? Ipiranga Shell Petrobrás Texaco Castrol Esso Mobil Drilling Linear LUBRAX TRUSLIDE TONNA GUIATEX MAGNA FEBIS VACTRA Machine Guide IND. FX CF 220 K 220 INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 51: Chain Lubrication

    2 – Open the door; 3 – Push the Drilling Set all the way up, as shown in Fig.7.17; 4 - Then push the Drilling Set forward, as shown in Fig.7.18; Fig.7.17 Fig.7.18 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 52 8 – After completing the chain lubrication, put the protection plate back in place with the screws 01 Fig.7.19; 9 – Close the door; 10 – To turn the machine on again, follow the steps described in item 6.1 – Turning the Machine on and off; INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 53: Compressed Air Regulator

    To replace a tool, proceed as follows: On the home screen of the command panel, click the Maintenance icon as shown in Fig.7.23. Fig.7.23 In the next screen, click on the “Tools” icon as shown in Fig.7.24: Fig.7.24 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 54 The next step is to loosen (not remove) the screw that secures the tool to the head. To do so, use a 2.5mm Allen wrench (01) as shown in Fig.7.26. Fig.7.26 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 55 Fig.7.30. This measurement should be inserted in the GCad tool settings (See GCad Manual). Fig.7.30 Once you have measured the tool size, close the door and go to the control panel. INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 56 On the control panel, disengage the Emergency Button that was previously pressed, Fig.7.31. Fig.7.31 On the display click on the “Alarms” icon as shown in Fig.7.32. Fig.7.32 In the next screen, click on the “Emergency” icon as shown in Fig.7.33. Fig.7.33 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 57 Back to the Main Screen, now click on the “Refer” icon as shown in Fig.7.36; Fig.7.35 Fig.7.36 Then press the Reset Button on the control panel to get the machine ready for work. INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 58 Then use a 5mm Allen wrench (01) to loosen the screw that retains the blade nut, and with a special wrench (02) retain the blade nut to perform the procedure as shown in Fig.7.39. Fig.7.39 After loosening, remove both bolt and nut and replace the blade. INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 59 Fig.7.44. When the assembly is driven forward the valve adjustment is ready. Fig.7.43 Fig.7.44 The next step is closing the door. INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 60 On the display click on the “Alarms” icon as shown Fig.7.46. Fig.7.46 In the next screen, click on the “Emergency” icon as shown in Fig.7.47. Fig.7.47 Then click on “Confirm” as shown in Fig.7.48. INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 61 The next step is to click “Close” as shown in Fig.7.49. Back to the Main Screen, now click on the “Refer” icon as shown in Fig.7.50. Fig.7.49 Fig.7.50 After referencing is complete, the Drilling Machine will be ready for use. INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 62: Belt Slack Adjustment

    4 – Check belt tension. In order for the belt to be optimally tensioned, use your fingers to press the central part of the belt, observing if there is a maximum flexing of 8mm, as shown in Fig.7.52. Fig.7.52 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 63 9 – To turn the machine on again, follow the steps described in item 6.1 – Turning the Machine on and off. Before performing any maintenance on the machine, turn off the motor and disconnect the machine from the mains. INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 64: Possible Problems - Causes - Solutions

    Be sure that the work procedure is OK. If you find any failure or risk to work, inform your su- Emergency Button activated. perior until the risk is completely eliminated before unlocking the Emergency Button. Inverter problem Contact a Technical Assistant. INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 65 Verify that the thickness of the First stroke to remove melanin is piece matches the thickness not being done properly. inserted on the GCad. Contact an INMES Technical Incorrect blade calibration. Assistant. INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 66 Mains voltage above or below the distributor and request an analysis locks in one position and no limits specified by ANEEL. and possible adjustment of the longer responds to commands. power grid. If the problem INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 67 Wi-Fi) is working properly. in GCad: “Error trying to write g Contact an INMES Technical code file”. Incorrect file save location. Assistant. *First ensure that there are no electrical system/motor failures. INMES Industrial LTDA. – IF-8500 Drilling Machine...

  • Page 68: Exploded Views

    9 – EXPLODED VIEWS 1 - Housing INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 69 P04050696 POLIC LUBRICATION STICKER IF-8500 P04070387 SPIRAL TUBE 6.00MMX7.0M W/ 01 TERM 1/4 BSP W/ SPRING P04070453 AIR NOZZLE FOR CLEANING 1/4 INCH P04070749 CONNECTION UNION TUBE PANEL 6.00MM (IMP) P04120605 WIRE GUIDE 1/2 INCH INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 70 2 - Door INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 71 04080241 BUTTON -HEAD HEX CAP SCREW M5X10MM 04080830 BUTTON -HEAD HEX CAP SCREW M4X10MM P03160062 SAFETY KEY SUPPORT IF-8500 P03160065 ACTUATOR SHEET SAFETY KEY IF-8500 (Z) P03160113 DOOR LED FOR PROTECTION SHEET P03160114 DOOR IF-8500 P03160154 POLIC COMPACT LARGE SMOKED SHEET IF-8500...
  • Page 72 3 – Structure 1 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 73 P03160206 SOCKET SCREW M10X30.00MM IF-8500 P04030253 PAN BASE HINGED LEVEL 60MM X M12 X 100MM P04050690 POLIC PPE STICKER IF-8500 P04050691 POLIC SAFETY INFO STICKER IF-8500 P04120304 PRESSER CABLE PG 11 INCH (GRAY) P04190018 STOP SJ-5312 TRANSPARENT INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 74 4 – Frame 2 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 75 P03010053 WASHER 6.35X17.46X1.58MM (1/4X11/16X1/16INCH) (Z) P03060460 INMES CYLINDER D24XC10MM - SA P03160022 CONTROL PANEL SHEET IF-8500 (06) P03160066 REAR COVER IF-8500 P03160073 CABLE TRAY BELT LOWER SUPPORT IF-8500 P03160155 RIGHT PHENOLIC SHEET IF-8500 P03160156 LEFT PHENOLIC SHEET IF-8500 P03160179 STOP CYLINDER TIP IF-8500...
  • Page 76 5 – Side Tables INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 77 EXTENSION ROLLER THRUST PLUG IF-8500 (Z) P03160224 EXTENSION OUTLET SUPPORT IF-8500 (M) P04030253 PNA BASE HINGED LEVEL 60MM X M12 X 100MM P04040310 RETRACTABLE SHAFT ROLLER 12.00X515.00MM W/TUBE 50.00X1.5X491.00MM P04040344 ROLLER 6300 DDU (2L) INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 78 6 – Central Column INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 79 P03160178 Y-AXIS END OF STROKE SHEET IF-8500 (Z) P03160184 Y-AXIS MOTOR SUBASSEMBLY IF-8500 P03160223 COUNTERWEIGHT IF-8500 (M) P04040375 LINEAR GUIDE HGR20-R-870-H (RACK) HIWIN (IMP) P04140142 CHAIN 06-B1 PITCH 3/8 INCH (115 LINKS) IF-8500 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 80 7 - Y-Axis Motor INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 81 P03160054 Y-AXIS MOTOR SUPPORT SHEET IF-8500 (Z) P03160056 GEAR ROLLER COVER Z72 IF-8500 (Z) P03160057 Y-AXIS GEARS SUPPORT SHEET IF-8500 P03160131 VERTICAL MOV AXLE GEAR IF-8500 (Z12 - 06B-1) P03160134 GEAR ROLLER SUPPORT Z72 IF-8500 (Z) P03160136 Y-AXIS GEAR SUPPORT PLUG IF-8500 (Z)
  • Page 82 8 - Roller Support INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 83 SOCKET HEX CAP STUD M5X06MM DIN 916 P03160024 ROLLER SUPPORT SHEET IF-8500 P03160139 ROLLERS PIN IF-8500 (Z) P03160201 GEAR RACK M1.25 AP20 RIGHT 1014MM P04040344 ROLLER 6300 DDU (2L) P04040376 LINEAR GUIDE HGR20-T-1020-H (CLAMP) HIWIN (IMP) INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 84 9 – Clamp INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 85 P03160003 MOT PITCH 8.5N.M BIPOLAR 5.6A 1.8DEG NEMA 34 W/ ENCODER P03160056 GEAR ROLLER COVER Z72 IF-8500 (Z) P03160081 CLAMP MOTOR SUPPORT SHEET IF-8500 (03) P03160089 CLAMP LINEAR GUIDE CART THRUST SHEET IF-8500 (Z) P03160091 CLAMP FEELER GAUGE IF-8500 (B) P03160121 CLAMP SUPPORT IF-8500...
  • Page 86 P04140143 STEEL SYNCHRONIZER PULLEY HTD Z-20 5M 25 6F HOLE D14MM (IMP) P04142634 SYNCHRONIZER BELT 750 HTD 5M 25MM P04160131 TRACTION SPRING 12.00X33.50 X1.50MM P04160139 TRACTION SPRING 8.00X9.00X1.00MM IF-8500 P04170076 ELASTIC RING FOR AXLE RETENTION D17,00MM P04170339 KEY 5.00X5.00X20MM T-A INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 87 9 – Electropneumatic Board 1-2 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 88 P04050042 POLIC ELECTRICITY STICKER P04050384 POLIC STICKER 24X74MM INMES TECHNICAL SUPPORT P04050562 POLIC EMERGENCY STICKER FF-300 P04050678 POLIC COMMAND PANEL STICKER IF-8500 (01) P04050679 POLIC COMMAND PANEL STICKER IF-8500 (02) P04050681 ALUM SERIAL NUMBER STICKER IF-8500 P04050693 POLIC KEEP FILTERS CLEAN STICKER IF-8500...
  • Page 89 P04123993 BLACK SWITCH KEY 2 POS FIXED 45G 1NA P04170017 TYPE Y RUBBER PROFILE (GST-0044) INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 90 10 – Electropneumatic Board 2-2 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 91 P04070542 SHORT SILENCER 1/8 INCH (IMP) P04070687 SIMPLE SOLENOID VALVE 3/2 PATHS 1/8INCH 220VAC P04070688 SIMPLE SOLENOID VALVE 5/2 PATHS 1/8INCH 220VAC P04120051 WIRE GUIDE 3/4 INCH P04120605 WIRE GUIDE 1/2 INCH P04121632 BSP PRESSER CABLE 1INCH INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 92 11 - Head Subassembly 01 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 93 P03160282 Y-AXIS CART SHIM SHEET IF-8500 (02) P03160283 Y-AXIS CART SHEET IF-8500 P03160284 Y-AXIS ADJUSTABLE LINEAR GUIDE CART SHEET IF-8500 P03160285 L CONNECTION M6X1.00 FOR M5 FOR GREASE NIPPLE IF-8500 P03160286 PLUG 16.00X6.00X15.00MM IF-8500 P03160287 HEAD CHAIN STRETCHER IF-8500 P04040353 BALL BEARING CONTACT ANGLE 3203 DDU...
  • Page 94 P04140143 STEEL SYNCHRONIZER PULLEY HTD Z-20 5M 25 6F HOLE D14MM (IMP) P04140235 SYNCHRONIZER BELT GATES 450 HTD 5M GT3 20MM P04160022 PLATE SPRING 680.008-03 P04170017 TYPE Y RUBBER PROFILE (GST-0044) P04170076 ELASTIC RING FOR AXLE RETENTION D17,00MM P04170339 KEY 5.00X5.00X20MM T-A INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 95 12 - Head Subassembly 02 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 96 P03160251 CART CHAIN COVER IF-8500 P03160252 CART CHAIN SUPPORT IF-8500 P03160253 PLUG 31.00X8.00X15.88MM IF-8500 P03160254 Z-AXIS LINEAR GUIDE SHIM IF-8500 P03160255 HEAD LINEAR GUIDE SHIM WASHER IF-8500 P03160256 A-AXIS CYLINDER FIXED TIP IF-8500 P03160257 A-AXIS CYLINDER SLIDING TIP IF-8500 P03160269 HEAD UPPER SHEET IF-8500...
  • Page 97 13 - Head Subassembly 03 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 98 Code Description 04080057 SOCKET HEX CAP STUD CV TIP M6X10MM DIN 916 P03160255 HEAD LINEAR GUIDE SHIM WASHER IF-8500 P03160258 TOOLS HEAD LOWER SHEET IF-8500 P03160259 TOOLS HEAD UPPER SHEET IF-8500 P03160260 MAIN DRIVING MOTOR PULLEY IF-8500 P04140145 STEEL SYNCHRONIZER PULLEY HTD Z-22 8M 20 6F 2 HOLE FLANGE D20MM P04210041 SAW BLADE 90X3.5X20 Z24...
  • Page 99 14 - Head Subassembly 04 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 100 04080841 SELF-LOCKING HEX NUT MA 4MM ZINC P03110109 CONNECTION R M6X0.75 FOR M5 FOR GREASE NIPPLE IM-2900 (SPARE PART) P03160153 SAW BLADE PROTECTION SHEET IF-8500 (Z) P03160181 HEAD PHENOLIC SHEET IF-8500 P03160226 PRESSER TIP IF-8500 P03160261 PRESSER UPPER SHEET IF-8500 P03160262 HEAD FEELER GAUGE IF-8500 (M) P03160263 PLUG 11.00X6.00X9.52MM IF-8500...
  • Page 101 15 - Head Subassembly 05 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 102 P03160182 MOT PITCH 4.5N.M BIPOLAR 5.6A 1.8DEGREE NEMA 34 W/ ENCODER 1000 P P03160267 A-AXIS MOTOR SHEET BLOCKER IF-8500 P03160268 HEAD A-AXIS MOTOR SENSOR SHEET IF-8500 P04140144 STEEL SYNCHRONIZER PULLEY HTD Z-22 8M 20 6F 1 HOLE FLANGE D14MM P04142637 SYNCHRONIZER BELT 512 HTD 8M 15MM...
  • Page 103 16 - Head Subassembly 06 INMES Industrial LTDA. – IF-8500 Drilling Machine...
  • Page 104 SOCKET HEX CAP SCREW W/ FLAT HEAD M6X20MM DIN 7991 P03020022 LEFT SAW AXLE NUT P03160044 MAIN MOTOR SUPPORT IF-8500 (Z) P03160132 DRIVING PULLEY FOR MAIN MOTOR IF-8500 P03160253 PLUG 31.00X8.00X15.88MM IF-8500 P03160271 DRIVING PULLEY MAIN MOTOR 50HZ IF-8500 P03160272 MAIN MOTOR SUPPORT 50HZ IF-8500 (Z)

Table of Contents