Sleepnet IQ Fitting Tips

The wire
embedded inside
the mask shell will
bend with slight
pressure
1. The mask shell can be shaped and re-shaped to follow the contours of the face.
If the mask has been shaped previously, return it to its original shape by hooking
your thumbs in the corners of the gel opening and bend the corners out. The
cushion shape should resemble an even triangle.
2. Assemble the mask to the headgear according to the product instructions. Place
mask and headgear on head, center, and adjust the straps for a comfortable fit.
If possible, fit while in your preferred sleeping position.
3. Connect mask tubing to airway pressure device tubing, and turn unit on.
4. If you feel any air leaks, gently press along the wire (embedded inside the mask
shell) to seal the leaks. The wire is very durable, and can be maneuvered
repeatedly.
5. If necessary, pull the mask away from your face and reset on the nose; move
mask higher or lower; or readjust headgear. The mask tubing can be secured to
the headgear with the loop strap, or draped to either side.
Please contact us if you have any questions on your IQ Mask and headgear:
603-758-6600 www.sleepnetcares.com
IQ StableFit Headgear
IQ mask with IQ StableFit Headgear
91001 Rev. D
The IQ
#55044
#50655
® ™
• Breath-O-Prene SILVERtec fabric
- Antimicrobial
- Maximizes breathability
- Latex free and adhesive free
• One size, stable frame
SleepNet Corporation • 5 Merrill Industrial Drive, Hampton, NH 03842 USA
1.800.742.3646 US & Canada • Tel. +603.758-.6600 • Fax. +603.758.6699
"SLEEPNET" and "IQ" are registered trademarks of SleepNet Corporation.
Nasal Mask
®
IQ 3 Point Headgear
IQ mask with IQ 3 Point Headgear
#55046
#50647
® ™
• Breath-O-Prene SILVERtec fabric
- Antimicrobial
- Maximizes breathability
- Latex free and adhesive free
• One size, minimum frame