INSTALLATION OF THE SEAT IN A CAR Note: The child restraint is only suitable for For group I / 9 - 18 kg / use with lap/3-point safety belts, approved Place the car seat in forward facing position on to ECE R16 or equivalent standards. the seat of the car.
Page 4
ADJUST THE LENGTH OF HARNESSES Shoulder belts In order to protect you child much better, after fix him/her in the child restraint and lock the buckle, you should tighten the harnesses so Buckle tongue they are snug and flat against the child’s body. They should never be twisted or loose.
REMOVING THE SEAT FROM THE VEHICLE To remove the seat from the vehicle follow the steps below: - unbutton the belt of the vehicle. - pull the safety belt of the vehicle through the openings on the car seat. - remove the car seat from the vehicle. ( VIII ) CHANGING THE HEIGHT OF HARNESSES...
Need help?
Do you have a question about the PILOT and is the answer not in the manual?
Questions and answers