Troubleshooting; Installation - Zoppas PEE3921IXK User Manual

Important! For stainless steel edges of the hob use the
cleaning agent for stainless steel.

Troubleshooting

Problem
You cannot activate the appliance
or operate it.
If you tried the above solutions and cannot repair the
problem, speak to your dealer or the customer service.
Give the data from the rating plate, three digit letter
code for the glass ceramic (it is in the corner of the
glass surface) and an error message that comes on.
Make sure, you operated the appliance correctly. If not
the servicing by a customer service technician or dealer
A
MOD.
PROD.NO.
SER.NO
DATA
MODEL
A) Stick it on Guarantee Card and send this part (if
applicable)
B) Stick it on Guarantee Card and keep this part (if
applicable)

Installation

Warning! Refer to the Safety chapters.
14
Possible cause
The appliance is not connected to
an electrical supply or it is connec-
ted incorrectly.
Problem with the house electrical
system.
B
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
MODEL
The stainless steel edge of the plate can change
the colour as a result of the high temperature.
Check if the appliance is correctly
connected to the electrical supply.
Examine the fuse in the electrical
system of the house in the fuse
box. If the fuses blow again and
again, speak to qualified electrician.
will not be free of charge, also during the warranty peri-
od. The instructions about the customer service and
conditions of guarantee are in the guarantee booklet.
Labels supplied with the accessories bag
Stick the adhesive labels as indicated below:
C
MOD.
PROD.NO.
0049 SER.NO.
C) Stick it on instruction booklet
Before the installation
Remedy
TYPE
230V-50Hz
IP20