Summary of Contents for Zephyr Europa Series
- Page 1 Europa Series Carbon Filter Kit Z0F-C022 - 2 Pack Z0F-C023 - 3 Pack Z0F-C042 - 2 Pack Z0F-C043 - 3 Pack 0Z0FC-70001 REV: 11/04 © Zephyr Corporation...
- Page 2 LIST OF MATERIALS ————————–— SPECIFICATIONS —–—————————— INSTALLATION ————————————— CLEANING AND CONTACT INFORMATION ———————–...
- Page 3 Z0F-C022, Z0F-C042 2 - Carbon Filters 2 - Metal Filter Brackets Z0F-C023, Z0F-C043 3 - Carbon Filters 3 - Metal Filter Brackets Note: If any parts are missing, please call 1-888-880-8368 for replacements.
- Page 4 Note: The only model hoods which will use the metal carbon filter brackets are the ZPY-E30x, ZPY-E36x, ZTA-E30x, ZTA-E36x and ZSA-M90S. The rest of the above Zephyr hoods have diffuser panels built into them behind the metallic filter. You may discard the metal bracket which came with your carbon filter kit if you are using the carbon filters on a hood which has a diffuser panel.
- Page 5 Follow the instructions below for installing the carbon filters to your metallic filters. 2. Push two corner tabs into metallic filter 1. Install metal bracket onto metallic filter from frame to lock it in. If pushing tabs in is difficult, hood by sliding one end of the metal bracket gently lift up on the corner lip of the bracket underneath the backside of the gray handle as...
- Page 6 4 - 6 months. Carbon filters may need to be replaced more frequently if you do much deep frying or if cooking odors are more noticeable. Zephyr Corporation 395 Mendell Street San Francisco, CA 94124 1-888-880-8368 www.zephyronline.com...
Need help?
Do you have a question about the Europa Series and is the answer not in the manual?
Questions and answers