Radio-tone RT-SMK1H User Manual

Smart Phone Mobile Radio-Style Talk Kit
RT-SMK1H / RT-SMK1F
User's Guide
Important Notice
Thank You Notice
Thank you for purchasing RT-SMK1H/RT-SMK1F Smart Phone Mobile Radio-Style Talk Kit. Please read this User's Guide
carefully before putting RT-SMK1H/RT-SMK1F into operation. Support for the RT-SMK1H/RT-SMK1F is available by email.
Please direct all questions via email to support@radio-tone.com. Your question(s) will be answered promptly.
Electrical shock hazard
Never attempt to connect the unit to any power network other than one for which it was intended.
Do not open the housing of the units.
Disconnect the unit from any power supply and from all other devices if a fault occurs.
Install the unit only in a dry place protected against the elements.
If you are uncertain about the safe operation of the unit, shut it down immediately and secure it to prevent any unauthorized
start-up. Safe operation is no longer possible, for example,
if damage is visible to the unit or the cables,
-
if the unit no longer operates correctly,
-
- if objects have penetrated inside the unit,
after long storage under improper conditions
-
Have the system checked by qualified, specialist personnel in such cases.
Installation and operation
Before installing or operating the system, ensure that you have read and understood the documentation for other
equipment connected to the unit. These contain important safety notices and information concerning permissible
applications.
Perform only the installation and operating work described in this guide. All other work beyond this may lead to injuries to
persons and damage to the system or other equipment.
Copyright © 2011-2014, Radio-Tone Company Limited. All Right Reserved.
Repairs and maintenance
Never open the housing of the RT-SMK1H/RT-SMK1F. The unit contains no parts which you can repair or replace. Ensure that
only qualified, specialist personnel (electrical technicians) are permitted to carry out maintenance or repair work.
Disclaimer
This pr
oduct is used to link up the radio networks and IP networks. Its operation and performance rely on the broadband
network connections via private and/or public networks. Due to the stability and reliability of these networks, this product
may not be able to link up all the networks connected without any interruptions. Therefore, it is not recommended to use
this product in an emergency system or a communication system with zero-failure.
This product can bridge and extend radio networks all over the world. Please consult your local regulations in order to use
this product legally.
Customers and/or users are taking full responsibilities and all risks in using this product. We are not responsible for any
direct or indirect losses caused by, but not limited to, communication failures as a result of product failure or network
problems
Preface
The RT-SMK1H and RT-SMK1F Smart Phone Mobile Radio-Style Talk Kits are the perfect accessory for turning your smart
phone into a traditional mobile radio-style PTT device, brings you the fast and stable push-to-talk communication anytime and
anywhere over the world!
Key Features
The key features of RT-SMK1H/RT-SMK1F are:
Excellent Voice Quality 3W Output
Remote Mobile Phone Volume Control (Maybe n
Operate By 2 AA Batteries or External DC5V Power Supply
Hand Microphone with PTT Button (RT-SMK1H only)
Tie Clip Microphone with Finger PTT Button (RT-SMK1F only)
Support Different OS Smart Phones
Product Descriptions
Packing List
RT-SMK1H/RT-SMK1F Smart Phone Mobile Radio-Style Talk Kit x 1
Hand Microphone with PTT Button x 1 (RT-SMK1H only)
Tie Clip Microphone with finger PTT Button x 1 (RT-SMK1F only)
USB Power Supply Cable x 1
2 USB Port Cigarette Lighter Adapter x 1
This User's Guide x 1
Copyright © 2011-2014, Radio-Tone Company Limited. All Right Reserved.
RT-SMK1H/RT-SMK1F User's Guide
User's Guide
RT-SMK1H/RT-SMK1F
Major Operating Controls, Terminals and Their Functions
1. Power ON/OFF Switch
This is the power on/off switch of the kit. When use external USB power source, this switch is sliced to left hand side.
2. Volume Control Buttons
These switches are used to control the volume of connected mobile phone (work for most Android phones. Maybe no effect
for some old phones.).
3. Smart Phone Connection Plug
This plug is used to plug into the earphone terminal of mobile phone, like Samsung Android Phone.
4. Status Indicator
This indicator shows the status of RT-SMK1. Blink means stand-by and light up means push and hold PTT.
5. Microphone & PTT Terminal
This terminal is used to connect Hand Microphone and Tie Clip Microphone.
6. USB Power Source Terminal
This terminal is used to connect to external DC5V power source.
7. Battery Holder
Put 2 AA standard batteries as power supply of the kit.
8. Microphone
This is microphone for picking up voice.
9. PTT Button
This is PTT button. Voice message will be transmitted when push-and-hold this button.
Copyright © 2011-2014, Radio-Tone Company Limited. All Right Reserved.
Installation
Simple System Connection Diagrams
Insert 2 AA batteries or connect micro USB cable to DC5V power supply.
Plug in the Hand Microphone / Tie Clip Microphone to the RT-SMK1.
Plug in the RT-SMK1 to a smart phone.
Turn on the power RT-SMK1, the status indicator will blink.
Install communication apps, such Azetti PTT/PoC, Zello.
Specifications
Power Supply : 2 AA Battery, or DC 5V Micro USB Jack
Power Consumption : 20mA (stand-by), 200mA (maximum)
Control Buttons : Vol Up and Vol Down on speaker, PTT on microphone
Smart Phone Connection : 4-pin 3.5mm Phone Plug
Microphone/PTT Terminal : 3-pin 3.5mm Phone Jack
Audio Output Power : 3W (maximum)
Dimensions : 192(W) x 113(D) x 80(H) mm (packing)
Weight : 520 g (with packing)
Weight and dimensions indicated are approximate.
Specifications are subject to change without notice.
Copyright © 2011-2014, Radio-Tone Company Limited. All Right Reserved.
RT-SMK1H/RT-SMK1F User's Guide
User's Guide
RT-SMK1H/RT-SMK1F
RT-SMK1v1-ug1