Advertisement
Method of usage
1.Connect the AC plug to the electrical outlet.
2.To switch on the massager, press the
applicance. The power lamp
will be illuminated.
3.Depending on your preference, you can choose to pull out the supporting stand to
suit your massaging needs. See picture.
Pull
To activate the kneading discs only
(1).Place the lower section of your legs into the fabric-covered slots. See picture.
(2).Press the
(kneading) button and the default mode will be
squeeze 1).
(3).Press the button again, and the mode will switch to
(4).Press the button again, and the mode will switch to
(5).Press the button again to stop the kneading precess or press the
on the switch panel anytime to terminate the kneading massage.
To activate the vibration board only
(1).Place the lower section of your legs into the fabric-covered slots. See picture.
(2).Press the
(vibration) button and the default mode will be
vibration).
(3).Press the button again, and the mode will switch to
(4).Press the button again, and the mode will switch to
(5).Press the button again to stop vibration process or press the
the switch panel anytime to terminate the vibration massage.It is possible to
experience both the kneading and vibration massages at the same time by pressing
(kneading icon), followed by
(vibration) or vice versa.
On/off
button located at the back of the
l
(rhythmic
ll
(rhythmic squeeze 2)
lll
(continuous squeeze).
(stop) button
auto
rhythmic
Hi
Lo .
(stop) button on
06
Method of usage
4 Different applications (position of usage)
07
Advertisement
