Advertisement
4. Client Installation and Setup
The Client Installation Program is a wizard-driven
procedure that will perform the following tasks.
• Install the client utilities and drivers into your PC.
• Automatically add all network ports to your PC.
The network port driver supports network protocol
autodetection. It will automatically select an available
network protocol (NetBEUI, IPX, or TCP/IP) on the
client computer to connect to the print server.
Since both the print server and the client side support
multiprotocols, the configuration process on the client
side is fully automatic.
The Client Installation can be performed in Windows
95/98/Me/2000/XP with the same user interface.
Before installation, please confirm that your PC has
already connected to the network and installed at least
one network protocol.
CHAPTER 4: Client Installation and Setup
21
Advertisement
