Download Print this page

Odor Crusher Ozone Closet Instructions For Assembly

Advertisement

Available languages

Available languages

Quick Links

A1
A2
10 ea
3 ea
End connector
End connector
D
4 ea
Long Vertical Pole
STEP 1.
Start by assembling the top and bottom sections. Insert parts (B) and (C)
into parts (A1) and (A2) as shown below. Insert one hanging rod (F) into top section.
Top and Middle Sections:
Bottom Section:
Note:
All metal parts
must be inserted rmly and
completely into the plastic parts.
STEP 2.
Building
up from the
assembled bottom
section, insert poles
(D) and (E) and
end connectors
(A1) and (A2) as
the diagram shows.
STEP 4.
Continue building
up from the assembled middle
section by inserting poles
(D) and (E) and end connectors
(A1) and (A2) as the diagram
shows.
NEED HELP?
Please contact our customer service line
BEFORE returning to the store. For help with assembly,
or if you are missing a part, please call our Customer Service
Department at 1-877-575-3173.
Ozone Closet – Instructions for Assembly
B
3 ea
Long Shelf
E
16 ea
Short Vertical Pole
Note:
be inserted into the stickered
side of (A2).
STEP 3.
Place the assembled
middle section onto the top of
the vertical poles.
C
5 ea
Short Shelf
F
2 ea
Hanging Rod
Short shelf (C) should
STEP 6.
Once the frame is fully assembled, place the
fabric shell over the frame to complete assembly.
An opening is located on either side of the back of the
fabric to allow the Ozone Machine power cord to run
through and plug into a wall outlet.
STEP 7B.
Machine by inserting Hanging
Bracket through the shelf rack.
Ozone Machine Instruction Manual
CAUTION! Read the Ozone Machine
Instruction Manual and warning label tags
Customer Service Line: 1-877-575-3173
One Year Limited Warranty
www. odorcrusher.com
MoJack Distributors, LLC
1-877-575-3173
Ozone Machine
Hanging Bracket
STEP 5.
Place the assembled top
section onto the top of the vertical
poles. Assembly of the frame is
now complete.
STEP 7A.
Hanging option for
the Ozone Machine. Attach the
Hanging Bracket on the back of
the Ozone Machine.
Hang Ozone
See the
for operating settings.
carefully before operation.
|
3535 N. Rock Road, Wichita, KS 67226
|
www.theMoJack.com
V061416

Advertisement

loading

Summary of Contents for Odor Crusher Ozone Closet

  • Page 1 Ozone Closet – Instructions for Assembly 10 ea 3 ea 3 ea 5 ea Ozone Machine End connector End connector Long Shelf Short Shelf Hanging Bracket 4 ea 16 ea 2 ea Long Vertical Pole Short Vertical Pole Hanging Rod STEP 1.
  • Page 2 Placard Hunters – Instructions d’assemblag e 3 de chaque Raccord d’extrémité 5 de chaque 3 de chaque 10 de chaque Support d’accrochage Étagère courte Étagère longue de l’ozoniseur Raccord d’extrémité 4 de chaque 16 de chaque 2 de chaque Montant vertical long Montant vertical court Tige de suspension ÉTAPE 1.