iTOUCH Playzoom Walkie Talkies Quick Start Manual

WA LK IE TA L KIE S

BELT CLIP ATTACHMENT

1. To remove the belt clip,
press the tab at the top of
the clip and slide upward.
2. To reattach, slide clip
piece down with the clip
facing inward until you
hear a click.

BATTERY INSTALLATION

1. Press down on the back
panel of the unit and slide
the battery cover off (you
may need to remove the
belt clip for easier access).
2. Insert 4AAA Batteries
(not included).
3. Replace the cover.

ON / OFF BUTTON

Press and hold down the power button (right of
LCD screen) for 3 seconds to power the device on
or off, a beep will indicate operation.

RECEIVE / TRANSMIT

To transmit, press and hold the TALK button while
talking into the device at a close range. Release
the button to finish talking - when the button is
released your walkie-talkie can receive transmissions.
Note: Walkie-talkies must be set to the same
channel and CTCSS code.
Release the TALK button when you're finished
talking to receive a response.

HOW TO CHANGE CHANNELS

• Press the MENU button once; the current channel
number will flash on the LCD screen.
• Press up & down buttons to change channel.
• Press the TALK button to confirm and return to
Standby mode.
Note: If no button is pressed, the device will return
to Standby Mode.