Battery Removal - Remington PR1330 Use And Care Manual

**Trimmer: Lubricate teeth with oil every
six months.
■ The battery must be removed from the
appliance before it is scrapped.
■ The appliance must be disconnected
from the outlet when removing the
battery.
■ Ensure that the clipper is discharged of
all power and disconnected from the
outlet.
To Remove the Rechargeable Battery:
1. Unplug the shaver.
2. Run shaver until motor stops.
3. Remove head from shaver (Press
release button and pull head straight
away from shaver body).
4. Unscrew the screw located on the
hair pocket assembly, and remove the
assembly.
5. Unscrew the two screws located on the
inner housing (black).
6. Using a small screwdriver pry front
cover from shaver body.

Battery Removal

7. Remove four screws located on front of
8. Remove rear cover from inner housing
9. Pry batteries free from circuit board
10. Dispose of batteries properly.
NOTE: Always recycle or properly
dispose of batteries according to
Local and State requirements.
CAUTION: THESE LITHIUM ION
BATTERIES MUST BE RECYCLED OR
DISPOSED OF IN ACCORDANCE WITH
STATE AND LOCAL REGULATIONS.
Do not burn or mutilate, as they may
burst or release toxic materials. Do not
short-circuit, as this may cause burns.
shaver.
to expose batteries.
and cut wires.
19