7. SURGE STEAM IRONING
The surge-of-steam feature provides powerful steam for removing stubborn wrinkles.
•
Fill the iron with water as described in "How to fill with water".
•
Plug iron into electrical outlet.
As indicated on the temperature control knob, steam ironing is only possible at higher temperature
•
setting indicated with 'MAX' mark, otherwise the water will leak from the soleplate.
•
Turn the temperature control knob to the position according to the fabric being ironed as described in
point 6 of 'Setting the temperature'
•
The indicator light will turn 'OFF' when the indicated setting reaches the correct temperature.
•
Press the Steam jet button to release the surge-of-steam. Pressing the button several times may be
necessary to prime the surge system..
Wait a few seconds for the steam to penetrate the fabric before pressing the button again for more steam.
•
•
NOTE: For optimum steam quality, do not apply more than four successive 'SHOT' after the indicator
light goes off.
8.
CLEAN & MAINTENANCE
Please unplug the iron and allow to cool the heating plate when carry out the maintenance.
Warning: To protect against electric shock, do not immerse cord, plug, or appliance in water or any
other liquid.
4