Easy@Home 95986 User Manual page 11

or if the power cord or plug is defective.
− If the power cord of the steam iron is damaged, do not use
it. Have the manufacturer, its customer service team or an
authorized professional or authorized specialist workshop
repair it. Contact the manufacturer via the address on the
warranty card.
− Do not open the housing; instead, have an authorized
qualified professional perform repairs. Liability and
warranty claims are waived in the event of repairs
performed by the user, improper connection or incorrect
operation. Contact the manufacturer via the address on the
warranty card.
− Only parts that comply with the original device data may
be used for repairs. This steam iron contains electrical
and mechanical parts which are essential for providing
protection against sources of danger.
− Never insert any object into the housing.
− The steam iron must not be operated with an external
timer or separate remote control system.
− Do not immerse the steam iron, power supply unit or
power cord in water or other liquids.
− Never touch the plug with wet or damp hands.
− Do not pull the plug out of the outlet by the cord; instead,
always pull it out using the plug itself.
− Never move, pull, or carry the steam iron by its power cord.
− Keep the steam iron, the power supply unit and power
cord away from open flames and hot surfaces.
− Lay the power cord so that it does not pose a tripping
hazard.
− Do not kink the power cord and do not lay it over sharp
edges.
− Only use the steam iron indoors. Do not use the steam iron
in damp rooms or in the rain.
− Never store the steam iron such that there is a risk of it
falling into a tub or sink.
Safety
11