Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for ParkerBrand PGHT-2600
- Page 1 HEDGE TRIMMER P G H T- 2 6 0 0 O W N E R S M A N U A L...
-
Page 2: Table Of Contents
INTRODUCTION CONTENTS This manual has been produced by Parker Products Ltd. and should be kept with the product and referenced for operation, maintenance and troubleshooting. GENERAL SAFETY ........................4-5 SAFETY SYMBOLS ........................6-7 This manual contains an overall description of the product, together with all the necessary information for using the FOR SAFE OPERATION ...................... -
Page 3: General Safety
GENERAL SAFETY GENERAL SAFETY For safe operation and maintenance symbols are moulded in relief on the machine or shown on a label. CLOTHING WARNING • READ THIS MANUAL CAREFULLY BEFORE USING THIS MACHINE. To reduce the risk of injury, user must read Appropriate clothing should be worn during •... -
Page 4: Safety Symbols
SAFETY SYMBOLS SAFETY SYMBOLS This symbol, before a safety comment, indicates a PRECAUTION, a WARNING or a DANGER. Ignoring WARNING! Exhaust gas contains toxic substances. this warning can lead to an accident for yourself or WARNING! To reduce the risk of injury, NO SMOKING! Do not run the engine in closed or poorly ventilated for others. -
Page 5: For Safe Operation
FOR SAFE OPERATION FOR SAFE OPERATION WARNING! • During rain storms, lightening storms, at times of strong or gale force WORK WEAR AND PROTECTIVE CLOTHING HANDLING OF FUEL winds or at any other times when weather conditions might make it •... - Page 6 • Use only recommended ParkerBrand replacement parts; use of any The area within a perimeter of fifty meters of the person using the in the fingers, hands, or joints, discontinue the use of this tool and seek other parts may void your warranty and cause damage to your unit.
-
Page 7: What's In The Box
WHAT’S IN THE BOX WHAT’S IN THE BOX OPERATION MAIN BODY 26CC ENGINE ROTATIONAL HANDLE FUEL MIX SPARK PLUG WRENCH / BOTTLE SCREWDRIVER BLADE GUARD... -
Page 8: Product Features
PRODUCT FEATURES PRODUCT FEATURES ROTATIONAL CHOKE STARTER ON/OFF HANDLE LEVER RECOIL SWITCH FRONT NOSE HANDLE PROTECTOR FUEL PRIMER BLADE EXHAUST CUTTING BUBBLE FILTER GUARD BLADES... -
Page 9: Pre-Operation
PRE-OPERATION STARTING PROCEDURE INSPECT HEDGE TRIMMER FILL WITH FUEL PRIME ENGINE THIS FUEL MUST BE MIXED WITH 2 STROKE OIL AT A 40:1 RATIO (PETROL:OIL) 40:1 Check the Hedge Trimmer is not damaged and all Fill the machine with 2 stroke oil at a 40:1 Prime the machine by utilising the primer bubble. - Page 10 STARTING PROCEDURE STARTING PROCEDURE ON/OFF SWITCH SETTING THE CHOKE PULL START RUN ENGINE Place the machine on a secure, firm, flat surface. Run the engine at idle speed until operating The On/Off switch is located on the handle When starting the machine from cold move When starting the machine from warm move temperature is reached (2 to 3 minutes).
-
Page 11: Stopping The Machine
STARTING PROCEDURE STOPPING THE MACHINE ENGAGE SAFETY TRIGGER ENGAGE THROTTLE RELEASE THE THROTTLE ON/OFF SWITCH Depress the safety lever on the top of the handle to With the throttle trigger unlocked you can now use Release the throttle trigger and safety lever and Press the ON/OFF switch into the 'OFF(0)' position. -
Page 12: How To Use The Handle
HOW TO USE THE HANDLE HOW TO USE THE HANDLE DEFAULT POSITION PULL LOCKING LEVER ANTI-CLOCKWISE HANDLE POSITIONS CLOCKWISE HANDLE POSITIONS The Hedge Trimmer handle is fully adjustable and First pull the locking lever located on the base of Whilst pulling the locking lever turn the handle in To turn the handle in a clockwise direction to the can be adjusted to suit each individual task to be the handle. -
Page 13: Maintenance
When cleaning the machine, inspect every part for damaged or loose AIR FILTER the blade. For setting or sharpening please contact ParkerBrand. parts, if any are found please fix or replace before next planned use. Once the machine has been run for 25 hours, please remove the filter... - Page 14 MAINTENANCE MAINTENANCE HOURS PART INSPECTION CHECK ACTION PART INSPECTION CHECK ACTION Assembled parts have become loose Tighten Inspect the engine cylinder Large gap between blades Adjustment required Clean the air cleaner filter element Body Blades have become worn Change or Repair Clean and adjust the spark plug Gap 0.6 - 0.7 Seems loose/tight...
-
Page 15: Troubleshooting
Clean or replace with a new air-filter. Dimensions (mm) 1110 x 240 x 224 Engine power loss Blocked fuel cap vent holes. Ensure vent hole in the fuel tank cap is clear. *All measurements are approximate. If you require further information please contact ParkerBrand directly... -
Page 16: Guarantee
This includes items such as recoils, starting mechanisms, spools, carburettors, blades and the like. ☑ 2006/42/EC Machine Directive (MD) ISTITUTO SERVIZI EUROPEI TECNOLOGICI Please go to www.parkerbrand.com in order to view the full warranty terms and exemptions from ☑ 2006/95/EC Low Voltage Equipment Directive Sede legale e uffici, ☑... - Page 17 PGHT-2600 September 2021 Rev 2.0...