Grooves; Effects (Sfx) - KETRON MIDJAY Owner's Manual

GROOVES

When you select this Groove Folder, you will be brought to a
screen showing you all the Groove Files within the Folder.
Highlight and select the Groove you wish to listen to and
press Enter to load the Groove. "Grv. Loading" will be
displayed while the Groove loads.
You will now be at the Groove screen that shows you the
Groove selected and its associated volume, the Voice (that
can be used via an external MIDI device/controller) and its
associated volume, the current split point, the Bar counter
and the Beats Per Minute (BPM) and Transposition value.
Press Start/Pause to play the Groove. The Grooves within the unit have been broken down into various
variations (which can be accessed or changed using the Play List buttons (Intro, A, B, C, D, Fill, Break and
End). You can either stop the Groove musically by pressing the End button or stop it abruptly by pressing the
Stop button. Press the Exit button to get back to the list of other Grooves available.

EFFECTS (SFX)

These effects are special sounds, effects, Voices etc that can
be used to enhance your performance at any time.
Selecting this Folder, you will find some Files with Special
Effects, which can be instantly activated, and several
attached Sub-Folders, with many other Effects divided
according to genres.
Highlight and select the effect you wish to listen to and press
Enter or Start/Pause to start playing it. Remember that these
can be used in conjunction with the Wave or MP3 Files.
12