Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Lightcloud LCOUTLET
- Page 1 Welcome Outlet WE ’ RE HERE TO HELP: 1 (844) LIGHTCLOUD or 1 (844) 544-4825...
- Page 2 Hello The Lightcloud Outlet is a tamper-resistant duplex receptacle that delivers local and remote plug-load control and power monitoring. Product Features Wireless Control & Configuration Zone Switching Dual Power Monitoring Tamper Resistant (TR) Current Limiting to 20A...
-
Page 3: Specifications
Contents Specifications PART NUMBER Outlet Faceplate LCOUTLET INPUT 125VAC, 60Hz CURRENT DRAW LOAD SWITCHING CAPACITY 2500W Resistive Faceplate Bracket Instruction Manual 1500W Tungsten 600W Electrical Ballast 1HP Motor OPERATING TEMPERATURE 0ºC to 40ºC DIMENSIONS Outlet: 1.73”W x 4.1”H x 1.6”D Faceplate: 2.94”W x 4.69”H x 0.06”D... -
Page 4: What You Need
What You Need Wiring Gateway A Lightcloud Gateway is required to setup and control the Outlet. Configuration CAUTION To configure the Outlet, use the Lightcloud • Use only copper wire. web application or call RAB: • Do not operate with the faceplate removed. -
Page 5: Finding A Suitable Location
Location Turn off power WARNING Lightcloud uses a wireless mesh network to connect devices such as the Outlet to the Gateway. Unlike a WiFi router, each Lightcloud device may connect another device to the network. If there is a clear line of sight between two Lightcloud devices, they can be placed up to 1000 feet apart. - Page 6 Setup & Installation (cont’d) Install the Lightcloud Outlet Connect the Line, Neutral, and Ground Use the two 6-32 1/2" Phillips round to screw terminals. head screws to secure the Outlet to the junction box.
- Page 7 Setup & Installation (cont’d) Install the Lightcloud Outlet Use the two 6-32 5/16" Phillips flat-head Snap the faceplate onto the screws provided to secure the faceplate faceplate bracket. bracket to the Outlet.
-
Page 8: Signal Strength Indicator
SIGNAL STRENGTH INDICATOR RESET DEVICE Network Indicator • Solid Green: Connected to a Lightcloud network • Blinking Red: Not connected to a Lightcloud network. RESET SIGNAL STRENGTH INDICATOR • Single Press: Indicate the Outlet in the Web • Indicates strength of the connection to the next... - Page 9 Setup & Installation (cont’d) Device Table Labeling your device When installing Lightcloud devices, it’s important to Two Device Tables are provided with each Gateway. keep track of their Device IDs, installation locations, Attach one table to the electrical panel and hand panel/circuit #’s, dimming function, and any...
- Page 10 Lightcloud is a commercial wireless lighting control system. It’s powerful and flexible, yet easy to use and install. Learn more at lightcloud.com 1 (844) LIGHTCLOUD 1 (844) 544-4825 support@lightcloud.com © RAB Lighting, Inc 170 Ludlow Avenue Northvale, NJ 07647 Custom manufactured in China...
- Page 11 FCC Information: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This device has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 Subpart B, of the FCC rules.
Need help?
Do you have a question about the LCOUTLET and is the answer not in the manual?
Questions and answers