Finish Cooking; Using The Double Zone Function - Blaupunkt 5RG64360 Instructions For Installation And Use Manual

Adjust heat setting by touching the slider control.
• If you don't choose a heat setting within 1
minute, the ceramic hob will automatically
switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time
during cooking.
• You can modify the power level from 0 to 9
By the slide control.

3.3.2 Finish cooking

Touching the heating zone selection control that you wish
to switch off.
Turn the cooking zone off by touching the slider to " ".
Make sure the displayshows"0"
Turn the whole cooktop off by touching the ON/OFF
control.
Beware of hot surfaces
"H" will show which cooking zone is hot to touch. It will disappear when the surface has cooled down
to a safe temperature. It can also be used as an energy saving function if you want to heat further pans,
use the hotplate that is still hot.

3.3.3 Using the Double zone function

• The function only work in 1# and 3# cooking zone
• The dual cooking zone has two cooking areas that you can use a central section and an outer section. You
can use the central section (A) independently or both sections (B) at once.
Zone 1# Zone 3#
8