Secufirst SEC 24 DID502 Manual

SETUP THEVIDEO DOORPHONE
1. AppDownloadand Installation
(1) Please download and install the "OMGuard HD" APP to your device.

2. Insert Batteries

(1) Unscrew the battery compartmentscrew
with suppliedscrew driver.
(2) Insert the batteries supplied.Make sure the
polarity is as indicated beforeinserting the
battery cartridge backto RVDP.
(3) After the batteries are inserted,the Push
Button illuminator will light upand _ash,
indicating RVDP isready for further setup.
*Note: If the illuminator isnot lighted,
press/holdthe Reset Button for 5 seconds
until the illuminator lights upand _ash.

3. Setup RVDP via App

(1) While the pushbutton illuminator is flashingRed& Blue,
launch the appand tap to add device.
(2) Scan QR codeto bring upthe DID or enter the DID manually
(The DIDsticker islocated at the back ofthe RVDP)
(3) Enter name for your RVDP(maximum20characters).
(4) Enter default Security Code:123456.
(5) Tap"Save" and follow in-appwizard to completethe setup.
™
24
a Brand
ALC Electronics B.V.
Ericssonstraat 2
5121 ML Rijen | The Netherlands
sales@secufirst.eu
www.secufirst.eu