Advertisement
Roberto Sport srl
Via A. Casale 63/A (Zona Industriale), 10010 Lessolo, TO
ITALY
P.I. 05961970018
Tel. +39 0125 58848 - Fax +39 0125 58851
info@robertosport.it /www.robertosport.it
Thank you for choosing one of Roberto Sport's products. Our tables are famous for their quality and
accuracy of their components. Roberto Sport has been producing table soccer, pool and hockey tables for
more than 65 years. Huge experience and tradition, constant research and innovation have brought
Roberto Sport's name as a synonymous of the "Made In Italy" football tables all over the world.
Unpacking and assembly operation should be carried out entirely by adults. Keep children away throughout
all steps. All small parts such as bolts, screws etc., not yet assembled, and nylon bags might be swallowed or
The model you just bought is for INDOOR USE. For this reason we suggest you to install it in sheltered
In order to keep your tables performance at a high level, we suggest you clean it periodically by using a
humid dust cloth. For difficult stain you may use abrasive-free detergents. For an utmost sliding rods: we
suggest you get the external part of the rod lubricated (the one in touch with the bushing) along with the
rod's internal part by using a silicon spray. Roberto Sport uses and supplies a special silicon spray studied,
produced and tested for these purposes. Do not use grease; it holds the dust and might block the rod
sliding. The telescopic rods assembled on this table are of a highly safe. To prevent rods bending, we
For any problem you might have, or any info you might need, do not hesitate to visit our web site:
Roberto Sport has a two- year warranty for its products starting from the acquisition date. Warranty covers
manufacture defects only; it doesn't cover damages caused by misuse or assigned to be due to wear & tear.
A manufacture defect must be reported at the earliest by a written communication within two months. A
written notification must be sent to the vendor. Roberto Sport is committed to restore the table with no
charge on the buyer by repairing or replacing the damaged part/parts or by offering a discount.
/
COLLEGE SIX
GENERAL WARNINGS
CARE & MAINTENANCE
environment, with low humidity degree and direct sun bean free.
recommend you do not load weight on the rods when extended.
www.robertosport.it or contact us at:
WARRANTY
inhaled.
sales@robertosport.it
Advertisement
Table of Contents
Related Manuals for Roberto Sport COLLEGE SIX
Summary of Contents for Roberto Sport COLLEGE SIX
- Page 1 (the one in touch with the bushing) along with the rod’s internal part by using a silicon spray. Roberto Sport uses and supplies a special silicon spray studied, produced and tested for these purposes. Do not use grease; it holds the dust and might block the rod sliding.
- Page 2 PARTS LIST Lubricant spray White ball Scoring unit Material for legs assembly Screw 8x55 Metal flat 8x32 square nut Allen spanner 5mm Screw 4,5x16 L Zinced bracket Material for rods assembly Screw 5x20 Set complete of rods...
- Page 3 ASSEMBLY INSTRUCTIONS The football table is packed in a carton box with the rods and legs to be assembled. The assembly operation is very simple and needs about 30 minutes. To start please follow the below instructions. Please read and keep these instructions for future reference. Legs assembly Set the L shaped bracket internally the table boby and insert the aluminium leg inside the L bracket.
- Page 4 Rods assembly 1. Place the rods into the holes from the handles side. 2. Set the bushing with the screw holes upwards 3. Fix the bushing using the screw (5x20 mm) Fix the scoring unit using its screws Fix the aluminium edge with the 4.5x16 screws (nr.
Need help?
Do you have a question about the COLLEGE SIX and is the answer not in the manual?
Questions and answers