Leslie 7467 Installation Instructions Manual

Console connector kit

Advertisement

LESLIE 7467 CONSOLE CONNECTOR KIT INSTALLATION INSTRUCTIONS
FOR USE WITH: WURLITZER Model 4700
LESLIE 212S Speaker
MULTIPLE SPEAKER INSTALLATION: For complete information, see the service manual
of the specific model LESLIE Speaker to be added.

CONTENTS OF KIT:

WARNING: Do NOT connect the Leslie 212S Speaker to the Wur1itzer model 4700
without first installing a Wurlitzer Left Hand Cheek Block Kit available from the
Wurlitzer Service Department: SEVERE DAMAGE MAY RESULT. Electro Music will not be
responsible for any damage due to installation without this kit.

TO INSTALL THE CONSOLE CONNECTOR KIT:

1. Disconnect Wurlitzer AC power plug and back cover.
2. Mount console connector chassis inside the Wurlitzer. Interceptor cables should
reach the Wurlitzer junction box, dual amp, and pedal amp.
3. Now make certain a Wurlitzer junction box for Leslie 212S installations is mounted
within the Wurlitzer. Two and three wire cables from the Wurlitzer echo controls
should be connected to the pedal and dual amplifiers, respectively. Also make
certain cables from the Wurlitzer dual and pedal speakers are connected to the
"DUAL INPUT" and "PEDAL INPUT" sockets on the Wurlitzer junction box.
4. Disconnect two wire echo control plug from the "TONE CAB" socket on the pedal
amp and insert it into the "PEDAL OUT" console connector interceptor. Then plug
this interceptor lnto the "TONE CAB" socket on the Wurlitzer pedal amp. (See "A"
on Fig. 1)
5. Disconnect three wire echo control plug from the "SPEAKER" socket on the dual
amp and insert it into the "RED & BLACK OUT" console connector interceptor.
Then plug this interceptor into the "SPEAKER" socket on the Wurlitzer dual amp.
(See "B" on Fig. 1)
6. Disconnect plug from the "SWELL" socket on the Wurlitzer dual amplifier. Insert it
into the "RED & BLACK IN" console connector interceptor. (See "C" on Fig. 1)
1 Console Connector
1 9 Conductor Cable
1 Instructions
1 Oiler
2 Wood Screws 8 x 1/2
Page 1 of 6
036731
021600
036988
053025
029132

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 7467 and is the answer not in the manual?

Questions and answers

Summary of Contents for Leslie 7467

  • Page 1 2. Mount console connector chassis inside the Wurlitzer. Interceptor cables should reach the Wurlitzer junction box, dual amp, and pedal amp. 3. Now make certain a Wurlitzer junction box for Leslie 212S installations is mounted within the Wurlitzer. Two and three wire cables from the Wurlitzer echo controls should be connected to the pedal and dual amplifiers, respectively.
  • Page 2 Wurlitzer Remote Tab, while "ECHO" sockets are controlled by the Wurlitzer Echo Tabs. 11. Connect 9 conductor speaker cable to the "CONSOLE" interceptor and the Leslie 212S Speaker. (See "F" on Fig. 1) Replace Wurlitzer back cover. Installation is now complete, with Wurlitzer's "Leslie"...
  • Page 3 PARTS LIST: 036723 CIRCUIT BOARD ASSEMBLY TRANSISTORS PART LOCATION DESCRIPTION PART NO. Transistor, MSPS 4382 026237 " 026237 " 026237 " 026237 " 026237 " 026237 " 026237 " 026237 C- 1 " 026237 " 026237 " 026237 " 026237 "...
  • Page 4 RESISTORS* PART LOCATION VALUE PART NO. 1.2K 018036 100K 028498 220K 5% 020222 028548 048157 048157 390K 018010 024133 4.7K 028555 028548 028548 1.5K 022277 024158 2.2K 028571 024133 1.2K 018036 100K 028498 220K 5% 020222 028548 18K 5% 028472 048157 028506 4.7K...
  • Page 5 PARTS LIST: 036731 CONSOLE CONNECTOR (including plugs and sockets) Description Part No. Description Part No. Chassis 034355 S2, S4, S5: Socket, 6 Contact 029546 Circuit Assembly 036723 Sleeve 029595 P1: Plug, 9 Pin - Amp 024653 P3: Plug, 8 Pin - Octal 027854 S1: Socket, S3: Socket,...
  • Page 6 Page 6 of 6...

Table of Contents