Panasonic TH-P42UT50D Service Manual page 25

8.2.6. Remove the AC inlet
Caution:
To remove AC inlet wait 1 minute after power was off for
discharge from electrolysis capacitors.
1. Disconnect the connector (P9).
2. Remove the screws (×1
inlet.
8.2.7. Remove the P-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for
discharge from electrolysis capacitors.
1. Unlock the cable clampers and the tapes to free the
cables.
2. Disconnect the connectors (P2, P6, P11 and P35).
3. Remove the screws (×5
, ×1
) and remove the AC
) and remove the P-Board.
8.2.8. Remove the Tuner unit
1. Unlock the cable clampers and the tapes to free the
cables.
2. Disconnect the connectors (A1, A6, A12 and A50).
3. Disconnect the flexible cables (A20, A31, A32 and A33).
4. Remove the screws (×4
8.2.9. Remove the A-Board
1. Remove the screws (×4
2. Remove the claws (×2
3. Remove the Side terminal cover and the Side shield
metal.
4. Remove the A-Board.
8.2.10. Remove the Speakers
1. Unlock the cable clampers and the tapes to free the
cables.
2. Disconnect the Speaker terminal.
3. Remove the screws (×2
Speakers (L, R).
25
) and remove the Tuner unit.
).
).
each) and remove the