Wirepath ONE WP-ONE-DOOR Series Quick Start Manual

A - Surface Mounting
Mount the door to a surface, no tricky leveling. Reverse the swing of the door prior to
installation if desired. See back for installation steps.
B - Router Friendly Construction
Made from durable UL Listed ABS plastic to ensure that there is little signal
interference when using routers or other wireless devices.
C - Mounting Platform
The platform allows for a flexible configuration. Flip the platform over to raise or lower
the height. Additionally, the fixed standoffs allow the platform to swing left or right.
D - Wire Guides
Manage your wires by routing through the wire
guides on the side of the platform.
E - Module Attachment Holes
Secure modules with pins or zip ties.
F - Lock & Key
Each door comes equipped with a pre-installed lock and 2 keys to keep prying hands
away from equipment inside the enclosure.
G - Plexiglass Window
View the status of a device through the plexiglass window without having to remember
to grab the key.
H - Venting and Trunk Line Management
Ventilation is huge. We've already accounted for that with open vents in the bottom
and top of the door. Additionally, you may run thick trunk lines through the open vents.
I - Media Enclosure Shelves (not included/shown)
Place shelves (WP-ONE-ENCL-SHELF) wherever you want! The shelves can be
mounted on the Mounting Platform on the inside of the door where space is available.
If mounting the shelf to a platform, as opposed to the module attachment holes, you
may need to press in the center hook to attach it properly.
J - Cross-compatible
All same-size Wirepath Enclosure cans are compatible with this surface mounted
door.
www.snapav.com Support: 866.838.5052
Wirepath ONE™ Door
Thank you for purchasing a premium product from Wirepath
Structured Wiring. The Wirepath ONE™ Media Door is designed to
provide serious flexibility for a professional installation.
A
B
C
D
E
F
G
H