Philips NORELCO 7000 Series Manual page 26

28
English
Using the Quick Clean Pod
6 Put the top of the Quick Clean Pod back
onto the base and turn it clockwise until
you hear a click.
Do not tilt the Quick Clean Pod to prevent
leakage.
Note: If you use the shaver with shaving foam,
shaving gel or pre-shave products, thoroughly
rinse the shaving heads before you use the
Quick Clean Pod (see 'How do I clean my
shaver?').
Always shake excess water off the shaver
before you place it in the Quick Clean Pod.
1 Place the shaver upside down into the
Quick Clean Pod. The shaver automatically
detects that it is in the Quick Clean Pod.
2 Switch on the shaver to start the cleaning
program.
Each cleaning program takes approximately
one minute. During the cleaning program
the cleaning symbol lights up continuously
and the blue icon pulses.
The shaver handle vibrates twice quickly
when the cleaning program is finished.