Table of Contents
Advertisement
Quick Links
by Rogerseller
Extraction Fan
Dimensions are approximate. Information in this technical overview is representative of the product available at the time of printing.
y of continuous product development, the design and specifications depicted are subject to change without notice.
Ple
ticulars with your client advisor prior to purchase.
Installation
Instructions
Advertisement
Table of Contents
Summary of Contents for ROGERSELLER Tectonic 3502001304
- Page 1 Installation Instructions by Rogerseller Extraction Fan Dimensions are approximate. Information in this technical overview is representative of the product available at the time of printing. y of continuous product development, the design and specifications depicted are subject to change without notice.
- Page 2 Specification Please read before beginning installation: The manufacturers warranty will not be covered if the product is installed in a room with systems or structures which do not meet the required building, electrical and ventilation standards or for work carried out by unqualified persons. The product must be installed by qualified technicians only, in-line with local standards.
- Page 3 Note: The performance curve chart has been tested in conjunction with the Rogerseller Torus In-line Exhaust Fan Motor, with each exhaust vent using 1x 90 degree bend on the inlet and 3m lengths of flexible duct connected to the inlet and outlet of the of the exhaust fan motor.
- Page 4 Specification Dimensions In-Ceiling Bracket Product Breakdown Exhaust Vent Butterfly Clip Thread Vent Cap Dimensions are approximate. Information in this technical overview is representative of the product available at the time of printing. y of continuous product development, the design and specifications depicted are subject to change without notice. ticulars with your client advisor prior to purchase.
- Page 5 Outlet power supply can then be plugged into mains power. Rogerseller recommends connecting the LED power supply in conjunction with the exhaust motor so that when the exhaust motor is operating the LED light is on, giving its desired effect. Alternatively the LED can be installed to be used in isolation to the Exhaust Motor.
- Page 6 Installation NOTE Prior to installation of product please make sure allowances have been made for: - Electrical connections_ Power sockets to accommodate LED lights (if required) & exhaust motor. - Exhaust connections_ Ductwork installed on both the inlet & outlet of exhaust motor. For installation of the Extraction Fan Motor please refer to instructions in product packaging.
- Page 7 Installation STEP 4 Lift the Butterfly Clips to the upward position in preparation to be inserted through ceiling cut-out. STEP 5 Insert ducting and Exhaust Vent through ceiling cut-out, pushing flush to the ceiling. Only release Butterfly Clips once product is inserted through the ceiling cut-out.
- Page 8 Warranty Rogerseller tapware, bathroom fittings and sanitaryware are covered by a five (5) year warranty from date of purchase. For full terms and conditions please refer to rogerseller.com.au Rogerseller Showrooms —...
Need help?
Do you have a question about the Tectonic 3502001304 and is the answer not in the manual?
Questions and answers