Advertisement
Quick Links
Lancetta
442
992
496
Lancetta Freestanding
Bath
3352000240 — Cristalplant
Matching waste supplied
468
Please note
• If there is no access to connect a trap to the bath waste, a 40mm PVC expansion joint with
a 40mm PVC cap and lining is recommended to be used to connect the bath at final fit-off.
• The bath must be installed on an adequately supported level subfloor.
• The installation must be carried out by two people.
• This bath weighs approximately 105kgs and holds approximately 270lts.
• Full installation instructions come with the product.
• This is only an installation guide. Rogerseller recommends having
the product on-site before commencing rough in.
Dimensions are approximate. Information in this technical overview is representative of the product available at the time of printing.
Due to our policy of continuous product development, the design and specifications depicted are subject to change without notice.
Please confirm all particulars with your sales consultant prior to purchase.
1895
Technical Overview
726
1012
Advertisement
Summary of Contents for falper Lancetta 3352000240
- Page 1 Lancetta Technical Overview 1012 1895 Lancetta Freestanding Please note Bath • If there is no access to connect a trap to the bath waste, a 40mm PVC expansion joint with 3352000240 — Cristalplant a 40mm PVC cap and lining is recommended to be used to connect the bath at final fit-off. •...
- Page 2 It is a requirement of State Plumbing Codes that licensed plumbers carry out all tapware installations. All installations should comply with the relevant requirements of AS/NZS 3500 and local plumbing codes. Care and Maintenance [1] Product should be inspected for surface damage prior to installation. [2]Cleaning and handling of all finishes must be performed carefully.