Advertisement
SPECIFICATION:
Model No.
Voltage
Vitro-Ceramic Wok
Electrical Power
Consumption
Safety Device
Dimension
TROUBLE SHOOTING
1. If your induction wok cooker seems to be working improperly, it doesn't necessarily mean it's
faulty. In all cases, check the below points.
2. If you fail to identify the problem, contact the after-sales service immediately.
Problem
No indication light when power "on"
Heating indicator does not light-up,
Appliance fails to heat up
Appliance suddenly stops heating
during Operation
IWC-25A Induction Wok
240V ~ 60Hz
Diameter: approx. 12.75"
Max. 2,500watt
Over Time Protector (2 Hrs.)
Automatic Safety Shut-Off
Material Compatibility Detector
Small Object Detector
Overheating Protection Device
IC Auto Reset.
15.16" x 16.61" x 6.30"
38.5cm x 42.2cm x 16cm
height)
Resolution
Cable/terminal block is loose
Tripped circuit or fuse; or automatic switch in your house
Power supply stopped
Unsuitable cooking utensil
Utensil is located at the center properly
Utensil is smaller than 5cm
Over-heating protection is activated
Temperature became too high
Air entrance or outlet blocked
Over-heating protection activated
Cecilware Corporation
43-05 20th Avenue
Long Island City, NY 11105
Tel: 800.935.2211, 718.932.1414
Fax: 718.932.7860
Technical Support
Tech.Support@cecilware.com
Customer Service:
Customer.Service@cecilware.com
www.cecilware.com
(including rubber-foot stand)
(including foot stand
Advertisement
