Trouble Shooting - Cecilware EL-15 Operation Manual

Trouble Shooting

If your Cecilware Fryer does not operate, please check the following before placing a service call.
Top Fryer
Problem
Oil not heating.
Indicator light is off
Oil is heating &
Indicator light is on
Indicator light is
not on but
appliance is
operating normally
Please ensure:
* There is correct power supply.
* The machine is plugged in correctly and power is switched on.
* The thermostat dial has been turned on.
Note all Cecilware products are tested prior to packaging.
：
Diagram Thermal Cut Out Reset
EL-6, EL-15, EL-25, EL-2x6, EL-2x15
Cause
1. Mains power supply
2. Element/ control unit not
correctly located
3. Fuse in the plug has
blown
4. Plug and lead
damaged
5. Internal wiring fault
6. Thermal cut-out
activated
1. Thermostat or
element has failed
1. Faulty pilot light
2. Oil has reached the set
temperature
B
A
1. Check mains power supply
2. Follow the steps on page 2 to
correctly locate
3. Replace the fuse in the plug with
correctly rated fuse
are 4. Call
technician
5. Call
technician
6. Remove reset button cover (A) press
button (B) to reset. See Diagram
has
for Thermal Cut Out Reset below.
If problem persists call service agent
or qualified technician
1. Call service agent or qualified
heating
technician
1. Call
technician
2. Use fryer normally
5
Remedy
service agent or
service agent or
service agent or
qualified
qualified
qualified