Storite rite 5 Assembly Instructions Manual

Call 0508 454 873
for an installer near you
If you choose to vary from these instructions
your warranty will be impaired.
rite
GABLE ROOF SHED
2280mm wide x 2280mm depth x 1830 - 2025mm high
ASSEMBLY
INSTRUCTIONS
You should have two packages:
• 1 cardboard package with the sheeting
• 1 plastic wrapped package
Tools required:
•
Battery or electric drill
•
3.3mm (1/8th inch) drill bit
•
Screwdriver and riveter
•
Tape measure
•
Ladder
•
Non-slip gloves, good shoes and goggles
•
A set of helping hands
Some parts have sharp edges and should be
handled very carefully. We recommend the use of
protective gloves and footwear when assembling.
DO NOT attempt to erect this shed in windy weather.
All dimensions are approximate.
If you need advice, call us FREE on 0800 807
433 or email us at info@storitesheds.co.nz
5