Advertisement
5. oPeratioN
5.1.
Pre-run engine for 10 minutes, to warm the oil and to allow any sludge or contaminants within the oil to mix and to suspend.
5.2.
Switch engine off and remove dipstick from vehicle.
5.3.
insert black part of suction probe into vehicle dipstick pipe until it reaches the bottom of the oil pan.
5.4.
With two hands pump handle (F) 10 to 20 times. Oil will flow out automatically.
do Not PumP continuouslY- do Not force tHe PumP HAndle.
8
5.5.
After extracting, remove tube cap (d) from container with a twisting action.
5.6.
Remove pump (B) from container (A), attach pour spout (C) and empty oil (fluid) into a suitable receptacle for safe disposal. do Not
hold the container upside-down.
6.
maiNteNaNce
6.1.
Keep the unit clean, wipe off any fluid spillage. Keep the suction tubes clean and clear of blockages. Check that all tubes, hoses and
connections are in good condition.
eNviroNmeNt ProtectioN
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk business Park, bury St edmunds, Suffolk. iP32 7ar
01284 757500
© Jack sealey limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
tP696
issue 2 (H, f) 11/01/18
Advertisement
