Operation Instructions; Screen Off Device - Justec OxiEasy W60 User Manual

Justec Shenzhen CO., LTD.

3.Operation instructions

3.1 Preparation
·Select a suitable sensor, the finger without oppressive feeling ,
comfortable and not easy to fall off.
·The wrist pulse oximeter is worn on the wrist。
·Plug the sensor cable into the sensors port located on the top
edge of the device. The markings on the plug and port must
match and face upward.
·Press the
button to switch on an it will go to measuring
mode.
3.2 Measurment
·As soon as a sensor is connected and correctly positioned on
the patient, monitoring begins automatically.
·Display shows after the measurement appears.
· Read the blood oxygen measurements and pulse rate
measurements after waiting for the value is stable.
SpO % 0 03 : BPM
2
3.3 Lock screen
Display OFF
3...2...1Sec
Press any key for ON
·Press the
button, after three seconds the screen turn off.
·The display can be turned on again by pressing any button. If
an alarm is triggered, the display will be turned on automati-
cally.
3.4 Turning Off Device
Press and hold the button for three seconds.
3.5 Data transmission
USB interface
Data transfer can be carried out from the pulse oximeter connect
with computer through the USB connector.
After you select USB , press the
off the transmission.
2) Date and time
OxiEasy W60 User Manual
SpO %
0 03 : BPM
2
98
73
button to to turn on or turn
4.Screen of Device
4.1 Main Menu
Main menu
All important and frequently used setting
Data management
are accessible through the main menu,
Setup
which can be opened by pressing the
t
Exi
button.
Navigating the Menu
Use the buttons to scroll through menu items. The currently
selected menu item is highlighted by a coloured franme. Press the
button to confirm your selection.
Entering Data
In some submenus it is possible to adjust a certain parameter. In this
case the parameter can be increased or decreased using the
buttons. The value will increase or decrease more quickly when the
respective button is held down. Press the
new value.
Exiting Menu and Returning to Display
Select the menu item " EXIT " to return immediately to the
monitoring display.
4.1.1 Submenu: Data Management
Remaining
98.61%
Data analysis
Delete all data
t
Exi
Use Data Management menu to
·view remaining recording capacity
·access list of stored data sets
·delete all data in memory
4.1.2 Submenu: Device Setup
4.1.2.1 General Information
Setup
Data transmission
Date and Time
Language
This submenu offers access to various device settings; comfirm
selection by pressing the
4.1.2.2 Adjusting Settings
1) Data transmission
Setup
Data transmission
Date and Time
Language
Version:2.0
button to confirm the
Setup
Language
Service
t
Exi
button.
Setup
USB off
Exit
5