Watch Set Up; Step 1 - Charge Your Watch; Step 2 - Register Your Watch - SmartWatcher SPIRIT User Manual

2. WATCH SET UP

EN

Step 1 - Charge your watch

Fully charge your watch before using it for the first time.
1. Plug the charging cable into the USB power adapter
and connect it to the power socket.
2. Place the watch on the charging cradle. It takes
about 2 hours to fully charge the watch.

Step 2 - Register your watch

1. Power on your watch by pressing and holding down
the power button on/off
2. Go to
3. Insert the watch's IMEI and ICCID numbers which
are shown on the watch face
4. Choose your preferred subscription. For detailed
information please visit
www.smartwatcher.com/services/
6
register.smartwatcher.com
3
for 2-3 seconds.
in your browser.
1
.