Page 1
Installation and operation manual Daikin Altherma simplified user interface Installation and operation manual English Daikin Altherma simplified user interface EKRUCBS...
Page 2
Activate the DHW tank booster mode (only if the system contains a domestic hot water tank, and provided that the domestic hot water control is turned ON). ON/OFF Turn ON or OFF the space heating/cooling or domestic hot water control (on the respective home pages). NAVIGATION BUTTONS Adjust the desired room temperature (on the room temperature home page). Installation and operation manual EKRUCBS Daikin Altherma simplified user interface 4P3822511 – 2014.06...
Page 3
Updating the software manually can take up to 2.5 hours. PC with Updater To connect the simplified USB cable User interface PCB user interface To indoor unit 3 Power ON the indoor unit. 1 Connect the cable of the simplified user interface to the indoor 4 Open Updater. unit. 5 In Updater, go to "Update procedure". 6 Type in the name of the interface (EKRUCBL* or EKRUCBS, depending on which you are updating). 7 Select the desired language pack (only for EKRUCBL*). 8 Follow the onscreen instructions. Main user interface Simplified user interface 2 Fix the cable with cable ties to the cable tie mountings. EKRUCBS Installation and operation manual Daikin Altherma simplified user interface 4P3822511 – 2014.06...
Page 4
Adjust Result: A progress bar appears. 4 Wait for the progress bar to finish and start flashing. Result: Both interfaces have identical software. 5 Power OFF the indoor unit. INFORMATION Copying the software from one user interface to the other transforms the receiver into the sender. Depending on which interface received the update, you now have either two main user interfaces or two simplified user interfaces. Installation and operation manual EKRUCBS Daikin Altherma simplified user interface 4P3822511 – 2014.06...