BOND MANUFACTURING Tank Hideaway 67635 Care And Use Instructions

Tank Hideaway
!

READ BEFORE USE AND KEEP FOR FURTHER REFERENCE

TM
This Tank Hideaway is intended for outdoor use only.
Do not use near flammable or combustible objects
or materials.
TM
Storage of this Tank Hideaway indoors is
permissible only if the tank is disconnected and
properly stored outdoors.
Young children should be carefully supervised
when in the vicinity of this Tank Hideaway
Do not sit or rest feet on this Tank Hideaway
Minimum clearance from Tank HideawayTM to appliance which is used with the Tank HideawayTM together and
other heat sources is 48"(121.9cm).

PACKAGE CONTENTS

ASSEMBLY INSTRUCTIONS

Step 1: Assemble 2 pcs feet (M6x25) to panel A. Step 2: Assemble 2 pcs feet (M6x25) to panel B.
Step 3: Assemble panel A and B to bottom
frame using 4pcs M5x10 screws.
Item#:67635
TM
: Care and Use Instructions
Always place this Tank Hideaway
non-combustible surface such as concrete, rock or stone.
This Tank Hideaway
space and shall not be used inside a building or garage.
This Tank Hideaway
propane gas (LP) tank (not included).
This Tank Hideaway
TM
used in or on recreational vehicles and/or boats.
.
TM
. Do not attempt to transport this Tank Hideaway
installed.

Hardware List

Item no.
Step 4: Assemble panel C to panel A, B
using 6pcs M5 x 10 screws.
TM
on a hard, level,
TM
must be used ONLY in a well-ventilated
TM
is designed for use with a 20 lb. liquid
TM
is not to be installed or
TM
with a gas tank
SPECIFICATION
1 M5X10 Screw
2 M6X30 Screw
3
M8X30 Wing Screw
4 M6X25 Feet
QTY
15
2
1
4