Advertisement
OPERATION OF COOKING ZONES
The cooktop control knobs are on the control panel on the oven.
•
Set the knob to the desired power setting (see the instructions supplied
with the oven).
•
To switch off the cooking zones, set the knob to position "0".
Important:
To avoid permanently damaging the glass-ceramic top, do not use:
•
Pots with bottoms that are not perfectly flat.
•
Metal pots with enamelled bottom.
ENERGY SAVING
•
Use pots and pans whose bottom diameter is equal to that of the cooker
plates, or slightly larger.
•
Only use flat-bottomed pots and pans.
•
If possible, keep the pot covered when cooking.
•
Cook vegetables, potatoes, etc. with little water in order to cut down
cooking time.
•
A pressure cooker allows you to save even more energy and time.
ECO DESIGN DECLARATION
This appliance meets the eco design requirements of European regulation
N. 66/2014, in conformity to the European standard EN 60350-2.
CARE AND MAINTENANCE
Important: never clean the appliance with high pressure water or steam
cleaning equipment.
•
Clean the hob, when it is cool, after each use. This will prevent the
build-up of dirt and make cleaning easier.
•
Use a clean cloth, absorbent kitchen wipes and washing up liquid or a
specific glass ceramic cleaner.
•
Remove baked-on dirt with the special scraper tool (if provided) and
specific cleaning products.
•
Any food spills should be cleaned off before they dry.
•
Do not use abrasive products, chlorine-based cleaners, oven-cleaner
spray or pan scourers.
TROUBLESHOOTING GUIDE
The hob does not work:
•
Make sure that the power supply is on.
•
Turn the hob off and on again, to make sure that the problem has been
solved.
•
Make sure that the knob is not turned to "0". Turn the multi-pole switch
to "Off" for a few minutes and then turn it back to "On".
AFTER SALES SERVICE
Before you call the After Sales Service
•
Make sure that you cannot solve the problem yourself following the
points described in chapter "Troubleshooting Guide".
If after the above checks the fault still occurs, get in touch with the
nearest After Sales Service.
Please give:
•
a short description of the fault;
•
the exact type and model of hob;
•
service number (i.e., the number that follows the word SERVICE on the
rating plate under the hob itself). The service number is also indicated
on the service leaflet;
•
your full address;
•
your telephone number.
If any repairs are required, please contact an authorised After Sales Service
(to guarantee that original spare parts will be used and repairs carried out
correctly).
Failure to comply with these instructions may compromise the safety
and quality of the product.
Advertisement
