Hama 00176594 Operating Instructions Manual page 3

Warnung - Max. 2300 W
Do not operate the product outside the power
limits given in the speci cations.
Risk of electric shock
• Do not open the device or continue to
operate it if it becomes damaged.
• Do not attempt to service or repair the
product yourself. Leave any and all service
work to quali ed experts.
4. Technical Data
Input and output
voltage
Maximum connection
power
Frequency band
Maximum radio-
frequency power
transmitted
5. Getting started and operation
Warning
• Only operate the product from a socket
that has been approved for the device.
The socket must be installed close to the
product and must be easily accessible.
• Disconnect the product from the power
supply using the On/Off switch – if this is
not available, unplug the power cord from
the socket.
• If using a multi-socket power strip, make
sure that the total power consumption of
all connected devices does not exceed the
power strip's maximum throughput rating.
• If you will not be using the product for a
prolonged period, disconnect it from mains
power.
It's so simple:
• Just download the app Hama Smart
• Start the Hama Smart Solution app
• If you're using it for the rst time, you'll have
• Connect the WiFi smart socket to a properly
• Press and hold the button on the socket for
• Now click + in the upper-right corner and se-
220–240 V
~ / 50 Hz
• Con rm with Device is ashing quickly.
• Now enter the name of your WiFi network
10 A,
2300 W
• The socket will now be connected. Once the
2.4 GHz
• Now you can set up, control and con gure
< 100 mW
• When switching on and off, the ring beneath
• Only during pairing is the WiFi symbol lit blue.
6. Care and Maintenance
• Only clean this product with a slightly damp,
• Make sure that water does not get into the
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use
of the product or from failure to observe the
operating instructions and/or safety notes.
Solution from the Apple app store or the
Google Play store
to register and create a new account. If you
already have an account, log in using your
login details
installed and easily accessible mains socket.
approx. 5 seconds until the blue LED begins
to ash quickly
lect Power socket followed by your device.
and the password, and con rm with
Con rm.
connection has been established, the blue
LED stops ashing
your WiFi Smart socket using the app.
is lit red.
Note
Disconnect the product from the mains before
cleaning it or if it is not going to be used for a
long period of time.
lint-free cloth and do not use aggressive
cleaning agents.
product.
3