Ferguson EYE DRIVE FHG200 Manual page 5

2. Car DVR settings
2.1 Software Setup
Language setting. Pressing the Menu button and enter the main menu. Choose
•
selection，press the OK button to do the language selection. Press Up and Down buttons to
choose the language you want, and press the OK button to confirm it.
Time and time zone settings：
•
✔ When using for the first time, please go the system menu to enter the option of
"Clock setting" to set the time as the current date and time.
✔ Time zone setting: There is GPS time service function on this machine. After GPS
positioning successfully, the date and time of the machine would be updated
automatically. To get the correct time service, please go the option of "Time Zone
Selection" to choose the corresponding time zone after learning your local time zone.
You can enter the system menu to do the other individual settings.
•
2.2 The Major Function and Basic Operation of Machine:
The On and Off of the Machine
•
✔ In normal driving mode: Connect the vehicle-mounted power well. The machine
would be on and start to record automatically when the car is on, which shall be off
automatically when the car is off.
✔ Manual mode: You can press the Power button manually to turn on or off the
machine.
WIFI Mode. After startup, initial setup of WIFI is off. When using, the following
•
operations should be completed:
✔ Please press and hold on the Up button to turn on the WIFI; then press and hold on
the Up button again to turn it off.
✔ Confirm that "Ferguson smart cam" APP application software is installed on the
device. Android version should be 4.0 or higher.
✔ Download mode: for Android, please enter Google play or Android Market to search
"Ferguson smart cam ".
✔ Open the WLAN in the phone setup to connect to the network recorder. (Initial
password is: 1234567890).
NOTE: After opening APP software on the mobile phone, you can look at the camera's
real-time sync pictures on the mobile phone. You can send camera files to the phone and
operate the camera on your phone.
2.3 Parking Monitoring Mode
Two parking monitoring modes are available on this machine, that is, P Mode and T Mode. The
specific application and description are as follow:
P Mode (vibration boot): press and hold on the Down button to turn on or turn off the
•
function of vibration boot. When this function is on, the machine will automatically start
and record if collisions occur to vehicles. Then it will shut down on its own after 20s. As for
starting the mode, the power in the local battery will be consumed. Therefore, users can add
mobile power as the source in practical use; meanwhile, some certain setting shall be made
in the menu.
T Mode (Time-lapse photography): press and hold on the OK button to turn on or turn off
•
the function of time-lapse photography. When this function is on, continuous recording will
5
language