Advertisement
fig.7
4.6.
CLOSING THE LADDER
4.6.1.
Clean the ladder if required.
4.6.2.
Hold the ladder upright ensuring that you do not catch your fingers when closing the ladder.
4.6.3.
Start by releasing the sliding safety locks at the bottom (fig.8). Release one lock at a time whilst holding the ladder with the other hand.
4.6.4.
The rung section slides away as soon as both locks are released. Hold the telescopic tubes a small way up the ladder and close the
rung sections carefully.
4.6.5.
Unlock and close the rest of the rungs, starting at the bottom and moving upwards one section at a time, holding with one hand and
releasing the lock with the other.
WARNING! DO NOT put hands between rungs when closing.
‰
4.7.
CHANGING THE LENGTH OF LADDER
4.7.1.
Always close the ladder first. (4.6)
4.7.2.
Open the ladder to the desired length. (4.5)
5. MAINTENANCE
5.1.
Repairs and maintenance shall be carried out by a competent person (with manufacturer's training) and be in accordance with the
producer's instructions.
5.1.1.
Only use genuine parts to repair.
5.1.2.
The collapsible tubes must be kept clean, remove paint spots, dirt, glue etc. before closing the ladder, keep the rungs clean.
5.1.3.
If using liquid cleaners use only a small amount on a soft piece of cloth, ensure the tubes are dry before collapsing the ladder.
5.1.4.
The plastic end caps should be always in place to prevent dirt entering the tubes.
5.1.5.
The ladder should not be used without the rubber feet and plastic end caps
5.1.6.
Always transport the ladder in the folded position to prevent damage to the tubes.
5.1.7.
Avoid subjecting the ladder to rough treatment, as damage to the tubes will affect the ladders collapsible function.
5.2.
STORAGE
5.2.1.
Store out of direct sunlight.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product. Please note that other versions of this product are available. If you require
documentation for alternative versions, please email or call our technical team on technical@sealey.co.uk or 01284 757505.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.8
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
ATL09.V3,ATL11.V3,ATL13.V3 | Issue 1 15/05/20
Advertisement
