Garden Treasures MD320 Quick Start Manual

1-866-728-6187, 8 a.m. – 6 p.m. EST, Monday – Friday, or e-mail us at customerservice@srg-usa.com.
Parts List
Part # Description
1 Pump
2 Garden hose adapter
Warnings
•
To reduce the risk of electrical shock, connect only to a properly grounded, grounding type receptacle (GFCI).
•
Do not exceed the voltage shown on the pump.
•
Always disconnect pump from the power source before beginning any maintenance or work on the pump.
•
Inspect cord for damage before installation and/or maintenance. Replace the entire pump assembly if damage is found.
•
Do not remove the grounding pin from the power cord plug.
Cautions
•
Use a proper power source as indicated on the pump label.
•
Keep the cord away from high temperatures or other heat sources.
•
Avoid using the pump when water temperatures fall below 41° F.
•
Do not use the pump in water exceeding 86° F.
•
Do not pump heated liquids.
•
Do not let the pump run dry. Pump must be completely submerged for proper operation and cooling.
•
Operate in freshwater only. Avoid heavily chlorinated water and water with high pH levels.
•
Do not lift the pump by its power cord.
Assembly Instructions
1. Remove the pump from the package and untie the power cord.
2. If applicable, attach garden hose adapter, fountain head, diverter valve, filter, etc.
3. Place your pump in the desired position in your pond or fountain, ensuring that it is completely submerged in the water. If the
pump is to be used in a pond, raise the pump off the pond floor to ensure that it is above any dirt that will collect, as this will
adversely affect pump performance.
4. Plug the power cord into a properly grounded receptacle.
5. Use the garden hose adaptor for draining your pond by attaching the adapter to the pump outlet and a garden hose.
Care and Maintenance
•
Keep water clean to prolong the life of the pump. Use of distilled water will reduce mineral deposits.
•
Use a filter when possible. This pump is compatible with the following filter models: PFSP (#60023), MF500 (#60024) and
MF750 (#60026).
•
Regular cleaning of the pump may be necessary depending upon the environment in which it is operated. Clean the pump
when it is visibly soiled or when a drop in performance is detected.
•
Before cleaning, always disconnect the pump from the power source.
•
Remove all parts from the pump and clean in warm, soapy water.
•
Disassemble the pump housing and remove the impeller housing to expose the impeller assembly. Remove the impeller
assembly by gently pulling on the impeller blades. Use a soft cloth or brush to clean the impeller assembly and the inside of the
impeller housing.
Questions, Problems, Missing Parts?
Before returning to your retailer, call our customer department at
Please have your model number available.
Item # 59080
Fountain Pump
(Model # MD320)
No Tools Required for Assembly
Quantity
1
1