Advertisement
Quick Links
STI LATCHING/TIMER MODEL LT-1
NOTE:
It is important to read, understand and follow all instructions provided with this
product. It is the installer's responsibility to comply with NFPA 70, 72 & 101, NEC,
mounting specifications according to ADA and other applicable codes. This product is
not to be used in place of panic hardware. To avoid electrical shock, DO NOT attempt
to install this product when power is on. After installation and testing are complete,
provide a copy of this manual to all personnel responsible for testing and maintenance
of this product.
1.28 in.
33mm
.632 in.
16mm
*POWER IN
12 - 24 VAC/VDC, 18 mA
TIMER
INPUT COM
CONTROL
FORM "C"
DRY CONTACTS
3A, 30VDC
1.74 in.
44mm
+
-
RESET
TRIGGER
N.C.
COM
N.O.
POWER LED GREEN
RELAY ACTIVE LED RED
Advertisement
Summary of Contents for Safety Technology International LT-1
- Page 1 STI LATCHING/TIMER MODEL LT-1 NOTE: It is important to read, understand and follow all instructions provided with this product. It is the installer’s responsibility to comply with NFPA 70, 72 & 101, NEC, mounting specifications according to ADA and other applicable codes. This product is not to be used in place of panic hardware.
- Page 2 SOLDER JUMPER WIRES USING APPROPRIATE HOLES. NO CUT RELAY MODE N.O. N.C. Ltch NO CUT RELAY MODE N.O. N.C. Ltch MODEL LT-1 12 to 24 Volts AC or DC Relay Relay Relay Trig Input Reset Power Input Safety Technology International, Inc.