Advertisement
4. When the character you want is at the cursor position, press C to move the cursor
to the right.
5. Repeat steps 3 and 4 until the name is complete.
You can input up to eight characters for the name.
6. After you input the name, press C as many times as necessary to move the cursor
to the number area.
You can input up to eight characters for the name. When the cursor is located at
the eighth space of the name, moving the cursor to the right causes it to jump to
the first digit of the number. When the cursor is at the 12th digit of the number,
moving it to the right (by pressing C) causes it to jump to the first character in the
name.
7. Use B and D to change the character (hyphen, number, or space) at the cursor
position in the number area. The character changes in the following sequence.
Press
.
Press
.
8. When the character you want is at the cursor position, press C to move the cursor
to the right.
9. Repeat steps 7 and 8 until you complete number input.
You can input up to 12 digits for the number.
The number initially contains all hyphens. You can leave the hyphens or replace
them with numbers or spaces.
10. Press A to store your data and return to the Telememo record screen (without
the cursor).
When you press A to store data, the message
for a while, indicating that data is being sorted. After the sort operation is
complete, the Telememo record screen appears.
To recall Telememo records
In the Telememo Mode, use D(+) and B(–) to scroll through Telememo records on
the display.
To edit a Telememo record
1. In the Telememo Mode, scroll through the records and display the one you want to
edit.
2. Hold down A until the flashing cursor appears on the display.
3. Use C to move the flashing to the character you want to change.
4. Use B and D to change the character.
For details on inputting characters, see "To create a new Telememo record" (step
3 for name input and 7 for number input).
5. After making the changes that you want, press A to store them and return to the
Telememo record screen.
To delete a Telememo record
1. In the Telememo Mode, scroll through the records and display the one you want to
delete.
2. Hold down A until the flashing cursor appears on the display.
3. Press B and D at the same time to delete the record.
The message
appears to indicate that the record is being deleted. After the
record is deleted, the cursor appears on the display, ready for input.
4. Input data or press A to return to the Telememo record screen.
WORLD TIME
World Time shows the current time in 27 cities (29 time
GMT differential
zones) around the world.
World map
For full information on city codes, see the "CITY CODE
TABLE".
The time zone that corresponds to the selected city
code flashes on the world map.
All of the operations in this section are performed in the
World Time Mode, which you enter by pressing C.
To view the time in another city code
While in the World Time Mode, press D to scroll forward
through the city codes (time zones) and B to scroll back.
If the current time shown for a city is wrong, check your
Timekeeping Mode time and Home City code settings
City code
and make the necessary changes.
Current time in the
selected city code
To toggle a city code time between standard time and Daylight Saving Time
1. In the World Time Mode, use B and D to display the
city code (time zone) whose standard time/Daylight
Saving Time setting you want to change.
2. Hold down A for about two seconds to toggle Daylight
Saving Time (DST displayed) and standard time (DST
not displayed).
The DST indicator is on the display whenever you
display a city code for which Daylight Saving Time is
turned on.
Note that the DST/Standard Time setting affects only
the currently displayed city code. Other city codes are
not affected.
Note that you cannot switch between standard time
and Daylight Saving Time while
the city code.
(space)
to
may appear on the display
is selected as
ALARM
You can set a Daily Alarm. When an alarm is turned on,
Hourly time signal on
indicator
the alarm tone sounds when the alarm time is reached.
You can also turn on an Hourly Time Signal that causes
Timekeeping Mode time
the watch to beep twice every hour on the hour.
The alarm and Hourly Time Signal operate in
accordance with the current digital time (Timekeeping
Mode time).
All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing C.
Alarm time
Alarm on indicator
To set the alarm time
1. In the Alarm Mode, hold down A until the hour digits of
the alarm time start to flash.
This automatically turns on the alarm.
2. Press C to move the flashing between the hour and
minutes.
3. While a setting is flashing, use D(+) to change it.
When setting the alarm time using the 12-hour format,
take care to set the time correctly as a.m. (no
indicator) or p.m. (P indicator).
4. Press A to return to the alarm display screen.
Daily Alarm Operation
The alarm sounds at the preset time each day for about 20 seconds, or until you stop
it by pressing any button.
The alarm and hourly time signal sound in all modes.
To test the alarm
In the Alarm Mode, hold down D to sound the alarm.
To turn the Daily Alarm and Hourly Time Signal on and off
In the Alarm Mode, press B to cycle through the on and off settings as shown below.
Alarm On Indicator/Hourly Time Signal On Indicator
Alarm On
Alarm Off
Signal On
Signal Off
STOPWATCH
The stopwatch lets you measure elapsed time, split times,
1/100 second
and two finishes.
The display range of the stopwatch is 23 hours, 59
minutes, 59.99 seconds.
The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
The stopwatch measurement operation continues even
if you exit the Stopwatch Mode.
All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing C.
The time on the screen may not appear to stop
Hours
Seconds
immediately when you press the button to stop an
Minutes
elapsed time operation or perform a split time operation
in the Stopwatch Mode. Despite this, the time recorded
by your button operation is accurate.
To measure times with the stopwatch
Elapsed Time
Start
Stop
Split Time
Start
Split
Two Finishes
Start
Split
First runner
finishes.
2358-2
Alarm On
Alarm Off
Signal Off
Signal On
Re-start
Stop
Clear
Split release
Stop
Clear
Stop
Split release
Clear
Second runner
Record time of
finishes.
second runner.
Record time of
first runner.
Advertisement
