Subscribe to Our Youtube Channel
Summary of Contents for Volt Polska OPTI ECO
- Page 1 MANUAL ECONOMIC CIRCULATING PUMPS VOLT POLSKA Sp. z o.o. ul. Grunwaldzka 76 81-771 Sopot www.voltpolska.pl sales@voltpolska.pl (58) 341-05-06 | przemek@voltpolska.pl (58) 341-38-80 | bartek@voltpolska.pl (22) 100-42-99...
- Page 2 1. INTRODUCTION Content of this manual is intended to facilitate the operation and use of domestic circulators as much as possible. It contains information on the safe installation and use of the product. It is recommended that you read the instructions carefully, as the lack of proper knowledge regarding the assembly and operation of the device may cause damage to the pump or personal injury caused by moving pump parts, leaking liquids or improper electrical connections.
- Page 3 NOTE: Pumps are not suitable for pumping aggressive, flammable, explosive, high viscosity liquids containing mineral oils, solid particles and fibrous impurities. Damage to the pump caused by pressing the above-mentioned types of liquids is not subject to warranty repairs. 4. PUMP INSTALLATION Device should be used as intended.
- Page 4 Terminal box settings can be changed as follows: Loosen the screws connecting the motor to the pump housing Turn the engine to the desired position Tighten the screws again Selection of pump setting depending on the type of installation. Factory setting = AUTO Pump setting Poz.
- Page 5 AUTO (underfloor heating or two-pipe systems) AUTO function (factory set) adapts the pump operating parameters to the current heating system demand. Since the pump operating parameters change slowly, it is recommended to leave the pump with the AUTO function activated before making changes to the pump settings, for at least a week.
- Page 6 5. ELECTRICAL INSTALLATION - CAUTION ll installation work must be carried out only by specialized personnel. VOLT POLSKA is not responsible for any damage to persons or property caused by the interference of persons who do not have the appropriate permissions. The electrical connection must be carried out according to the following diagram: 6.
- Page 7 7. WARRANTY When sending the device to the service, the user is obliged to empty the pump of residual water or other liquids, as well as to protect the device against any damage that may occur during transport. Any damage caused by the customer is not subject to warranty repair. WARRANTY DOES NOT COVER: damage resulting from improper transport by the purchaser's means, and any mechanical ź...
- Page 8 WARRANTY CARD DAT E OF PURCHASE SHIPM ENT ADDRESS SIGNAT URE DAM AGE DESCRIPT ION SERVICE INFORM AT ION FILL IN CASE OF NEEDS (*) Delete as appropriate I agree to the paid repair of the pump due to: (*) expiration of the warranty period / damage caused by the fault of the user Before starting the repair, the service will inform you by phone about the exact costs of the repair.
Need help?
Do you have a question about the OPTI ECO and is the answer not in the manual?
Questions and answers